VMware Multi-Pathing plug-in for ETERNUS AB/HB
VMware Multi-Pathing plug-in for ETERNUS AB/HB (hereinafter referred to as "this software") is designed as a Storage Array Type Plugin (SATP) for Fujitsu ETERNUS AB/ETERNUS HB.
In the event of a path failure SATP automatically switches paths in conjunction with VMware standard Native Multipathing Plugin (NMP) with its failover capacity.
Using this software, ETERNUS path failover function is reinforced much further than the standard VMware SATP, and it enables continuous access even during a path failure and improves the reliability of the system.
Requirements
Requirements for hardware and software are listed below.
OS | VMware vSphere 8.0 Standard
VMware vSphere 8.0 Enterprise Plus VMware vSphere 7.0 Standard VMware vSphere 7.0 Enterprise Plus |
|
---|---|---|
Supported Storages | All-Flash Arrays | ETERNUS AB2100 ETERNUS AB3100 ETERNUS AB5100 ETERNUS AB6100 |
Hybrid Storage Systems | ETERNUS HB1100 ETERNUS HB1200 ETERNUS HB2100 ETERNUS HB2200 ETERNUS HB2300 ETERNUS HB5100 ETERNUS HB5200 |
Download
Download is free.
For use of VMware Multi-Pathing plug-in for ETERNUS AB/HB (hereinafter called "this software"), Fujitsu requires that you agree with the following "Conditions of use". Using this software means the following conditions are agreed, so please desist from downloading if you don't agree.
Conditions of use
Please ensure that the following usage conditions are met when using this software.
Do not use this software if you cannot observe these use conditions.
-
This software can be used only with the target model(s).
-
This software cannot be redistributed.
-
You may not reverse engineer, decompile or disassemble the software.
-
Any copyright mark concerning this software may not be revoked.
-
Any damage occurring following use of this software is at your own risk, Fujitsu will not assume any responsibility for operational problems.
Download: VMwareVAMPAHB_1.0.0.zip (68KB)
How to download and install
Unzip the file, find and install the package onto the ESX/ESXi host.
Please refer to "readme.txt" which is enclosed in the zip file for detailed installation procedure.
Revision record
Release date | Modifications | Note |
---|---|---|
Jul 21, 2023 | Added the support for VMware vSphere 8.0 Version 1.0.0 | Supported VMware vSphere 7.0 / 8.0 |
Feb 28, 2023 | Newly created. Version 1.0.0 |
Supported VMware vSphere 7.0 |