VMware Multi-Pathing plug-in for ETERNUS AF/DX
VMware Multi-Pathing plug-in for ETERNUS AF/DX (hereinafter referred to as "this software") is designed as a Storage Array Type Plugin (SATP) for Fujitsu ETERNUS DX/ETERNUS AF.
In the event of a path failure SATP automatically switches paths in conjunction with VMware standard Native Multipathing Plugin (NMP) with its failover capacity.
Using this software, ETERNUS path failover function is reinforced much further than the standard VMware SATP, and it enables continuous access even during a path failure and improves the reliability of the system.
Requirements
Requirements for hardware and software are listed below.
| OS | VMware vSphere 8.0 Standard
VMware vSphere 8.0 Enterprise Plus VMware vSphere 7.0 Standard VMware vSphere 7.0 Enterprise Plus VMware vSphere 6.7 Standard VMware vSphere 6.7 Enterprise Plus VMware vSphere 6.5 Standard VMware vSphere 6.5 Enterprise Plus VMware vSphere 6.0 Enterprise VMware vSphere 6.0 Enterprise Plus VMware vSphere 5.5 Enterprise VMware vSphere 5.5 Enterprise Plus |
|
|---|---|---|
| Supported Storages | All-Flash Arrays | ETERNUS AF250 S2/AF250
ETERNUS AF650 S2/AF650 ETERNUS DX200F |
| Hybrid Storage Systems
Disk Storage Systems |
ETERNUS DX60 S4/S3
ETERNUS DX100 S4/S3, DX200 S4/S3 ETERNUS DX500 S4/S3, DX600 S4/S3 ETERNUS DX8700 S3, DX8900 S3 ETERNUS DX60 S2 ETERNUS DX80 S2 ETERNUS DX90 S2 ETERNUS DX400 S2 ETERNUS DX8000 S2 |
|
Download
Download is free.
For use of VMware Multi-Pathing plug-in for ETERNUS AF/DX (hereinafter called "this software"), Fujitsu requires that you agree with the following "Conditions of use". Using this software means the following conditions are agreed, so please desist from downloading if you don't agree.
Conditions of use
Please ensure that the following usage conditions are met when using this software.
Do not use this software if you cannot observe these use conditions.
-
This software can be used only with the target model(s).
-
This software cannot be redistributed.
-
You may not reverse engineer, decompile or disassemble the software.
-
Any copyright mark concerning this software may not be revoked.
-
Any damage occurring following use of this software is at your own risk, Fujitsu will not assume any responsibility for operational problems.
Download: 
VMwareVAMP_1.3.0.zip (120KB)
How to download and install
Unzip the file, find and install the package onto the ESX/ESXi host.
Please refer to "readme.txt" which is enclosed in the zip file for detailed installation procedure.
Revision record
| Release date | Modifications | Note |
|---|---|---|
| Jul 10, 2023 | Added the support for VMware vSphere 8.0 Version 1.3.0 | Supported VMware vSphere 6.5 / 6.7 / 7.0 / 8.0 |
| Oct 2, 2020 | Added the support for VMware vSphere 7.0 Version 1.3.0 | Supported VMware vSphere 5.5 / 6.0 / 6.5 / 6.7 / 7.0 |
| Dec 20, 2019 | Added the support for VMware vSphere 6.5 / 6.7 Version 1.2.1 | Supported VMware vSphere 5.5 / 6.0 / 6.5 / 6.7 |
| May 12, 2015 | Added the support for VMware vSphere 6.0 Version 1.1.1 | Supported VMware vSphere 4.1 / 5.0 / 5.1 / 5.5 / 6.0 |
| June 19, 2014 | Error handling is improved. (vSphere 5 Only) | |
| September 19, 2013 | Added the support for VMware vSphere 5.5 Version 1.1.0 |
Supported VMware vSphere 4.1 / 5.0 / 5.1 / 5.5 |
| March 18, 2013 | Added the support for VMware vSphere 5.0 / 5.1 Version 1.1.0 |
Supported VMware vSphere 4.1 / 5.0 / 5.1 |
| November 30, 2012 | Newly created. Version 1.0.0 |
Supported VMware vSphere 4.1 |
Note) We stopped publishing Version 1.2.0 because PSOD occurs. Uninstall Version 1.2.0 if you are using it.
