Naming Conventions When Adding Hosts

The following naming conventions apply when adding hosts:

• A name is automatically applied to a host with the "host group name" and a suffix number "x" (serial numbers starting with "0").

  [Example] When specifying "HOST_Group_001" (14 characters) as the host group name

  Names such as "HOST_Group_001_0" and "HOST_Group_001_1" are applied to the host groups.

• When the host name including the suffix number "x" has more than 16 characters, the excess number of characters is deleted from the "host group name", starting with the last character and a suffix number "~x" will be added. Then, the name will contain only 16 characters.

  [Example] When specifying "HOST_Group_ABCDE" (16 characters) as the host group name

  Names such as "HOST_Group_ABC~0" and "HOST_Group_ABC~1" are applied to the host groups.

• When a host name including the suffix number already exists, the suffix number is increased by one (+1). The suffix number is increased by one (+1) until no host names overlap.

• The hosts, which were selected on the [Now Connected] screen, are named, and then the hosts, which were specified on the [Manual Input] screen, are named next.

• The name of the existing member host will not be changed.