Supported Functions for Each Controller Firmware Version

The following shows the functions that are supported for each controller firmware version. "OK" indicates that the function is supported for that specified firmware and later versions.

Function			Supported controller firmware version
Function			V12L10
Overview
	Overview		OK
Volume
	Volume (Basic Information)		OK
	Performance (Host I/O)		OK
	Performance (QoS)		OK
	Performance (Advanced Copy)		OK
	LUN Group		OK
	Reservation		OK
	Pinned Data		OK
	Bad Sector		OK
	Balancing Thin Provisioning Volume		OK
	Create Volume		OK
	Delete Volume		OK
	Rename Volume		OK
	Format Volume		OK
	Expand Volume		OK
	Encrypt Volume		OK
	TPV Management
		Expand Thin Provisioning Volume	OK
		Modify Thin Provisioning Volume Threshold	OK
		Optimize TPV/FTV Capacity	OK
		Cancel Optimizing TPV/FTV Capacity	OK
		Start Balancing Thin Provisioning Volume	OK
		Stop Balancing Thin Provisioning Volume	OK
		Set Allocation	OK
	SDV/SDPV Management
		Delete Snap Data Pool Volume	OK
		Force Delete Snap Data Pool Volume	OK
		Initialize Snap Data Volume	OK
	Start RAID Migration		OK
	Stop RAID Migration		OK
	Stop External Volume Data Synchronization		OK
	Forbid Advanced Copy		OK
	Permit Advanced Copy		OK
	Release Reservation		OK
	Modify Cache Parameters		OK
	Export Cache Parameters		OK
	Export Performance Information		OK
	Set ALUA		OK
	Set Volume QoS		OK
	Set Volume QoS Pattern		OK
	Delete External LU Information		OK
	Change Data Reduction Processing CM		OK
RAID Group
	RAID Group (Basic Information)		OK
	Tuning		OK
	Eco-mode Schedule (RAID Group)		OK
	External RAID Group		OK
	Create RAID Group		OK
	Delete RAID Group		OK
	Rename RAID Group		OK
	Change Controlling CM		OK
	Expand RAID Group		OK
	Modify RAID Group Parameters		OK
	Assign Eco-mode Schedule (RAID Group)		OK
	Set Key Group (RAID Group)		OK
	Recovery SED		OK
	External RAID Group Management
		Create External RAID Group	OK
		Delete External RAID Group	OK
		Recover External RAID Group	OK
Thin Provisioning
	Thin Provisioning Pool
		Thin Provisioning Pool (Basic Information)	OK
		Threshold (Thin Provisioning Pool)	OK
		Eco-mode Schedule (Thin Provisioning Pool)	OK
	Flexible Tier Pool
		Flexible Tier Pool (Basic Information)	OK
	Settings (Thin Provisioning)		OK
	Set Thin Provisioning		OK
	Create Thin Provisioning Pool		OK
	Delete Thin Provisioning Pool		OK
	Rename Thin Provisioning Pool		OK
	Expand Thin Provisioning Pool		OK
	Format Thin Provisioning Pool (All Area)		OK
	Format Thin Provisioning Pool (Unformatted Area)		OK
	Set Deduplication/Compression		OK
	Modify Threshold Thin Provisioning Pool		OK
	Modify Cache Parameters (TPP)		OK
	Assign Eco-mode Schedule (Thin Provisioning Pool)		OK
	Start Balancing Flexible Tier Pool		OK
	Stop Balancing Flexible Tier Pool		OK
Advanced Copy
	Advanced Copy (Basic Information)		OK
	Advanced Copy (All Local Sessions)		OK
		EC	OK
		OPC	OK
		QuickOPC	OK
		SnapOPC	OK
		SnapOPC+	OK
		Monitor	OK
	Advanced Copy (All Remote Sessions)		OK
		REC	OK
	ODX Sessions		OK
	XCOPY Sessions		OK
	Virtual Volume Sessions		OK
	Settings (Advanced Copy)		OK
		Snap Data Pool	OK
		Copy Path	OK
		REC Buffer	OK
		REC Disk Buffer	OK
	Start SnapOPC+		OK
	Stop Copy Session		OK
	Register Advanced Copy License		OK
	Delete Advanced Copy License		OK
	Register Veeam Storage Integration License		OK
	Delete Veeam Storage Integration License		OK
	Modify EC/OPC Priority		OK
	Modify Copy Table Size		OK
	Modify Copy Parameters		OK
	REC Management
		Export Storage Information	OK
		Set Copy Path	OK
		Delete All Copy Path	OK
		Export All Copy Path	OK
		Measure Round Trip Time	OK
		Modify REC Buffer	OK
		Create REC Disk Buffer	OK
		Assign REC Disk Buffer	OK
		Delete REC Disk Buffer	OK
		Format REC Disk Buffer	OK
		Modify REC Multiplicity	OK
		Set REC Bandwidth Limit	OK
		Set REC Line Speed	OK
	ODX Management
		Enable ODX	OK
		Disable ODX	OK
		Create ODX Buffer Volume	OK
Connectivity
	Connectivity (Basic Information)		OK
	Host Group		OK
		FC Host	OK
		iSCSI Host	OK
	CA Port Group		OK
		FC Port	OK
		iSCSI Port	OK
	LUN Group		OK
	Host Response		OK
	CA Reset Group		OK
	Host-LU QoS		OK
		FC Host QoS	OK
		iSCSI Host QoS	OK
		FC Port QoS	OK
		iSCSI Port QoS	OK
		LU QoS Group	OK
	Host Affinity Management
		Create Host Affinity	OK
		Delete Host Affinity	OK
		Modify Host Affinity	OK
	Host Group Management
		Add FC Host Group	OK
		Add iSCSI Host Group	OK
		Delete Host Group	OK
		Modify Host Group	OK
		Modify Host Group (FC)	OK
		Modify Host Group (iSCSI)	OK
		Add FC Host	OK
		Add iSCSI Host	OK
		Delete FC Host	OK
		Delete iSCSI Host	OK
		Modify FC Host	OK
		Modify iSCSI Host	OK
	CA Port Group Management
		Create FC Port Group	OK
		Create iSCSI Port Group	OK
		Delete CA Port Group	OK
		Modify CA Port Group	OK
		Modify FC Port Parameters	OK
		Modify iSCSI Port Parameters	OK
		Modify Port Mode	OK
	LUN Group Management
		Add LUN Group	OK
		Delete LUN Group	OK
		Modify LUN Group	OK
	Host Response Management
		Add Host Response	OK
		Delete Host Response	OK
		Modify Host Response	OK
	Modify CA Reset Group		OK
	Host-LU QoS Management
		Enable QoS/Disable QoS	OK
		Initialize QoS	OK
		Set Host-LU QoS	OK
		Release Host-LU QoS	OK
		Start Host-LU QoS Performance Monitoring	OK
		Stop Host-LU QoS Performance Monitoring	OK
		Set Host QoS Pattern	OK
		Set Port QoS Pattern	OK
		Set LU QoS Pattern	OK
		Set FC Host QoS	OK
		Set iSCSI Host QoS	OK
		Set FC Port QoS	OK
		Set iSCSI Port QoS	OK
Add LU QoS Group		OK
Delete LU QoS Group		OK
Modify LU QoS Group		OK
Component
	Storage (Basic Information)		OK
	Controller Enclosure		OK
		Controller Module	OK
		Performance (CM)	OK
		Channel Adapter	OK
		Performance (CA)	OK
		Login Host	OK
		Drive Adapter	OK
		Bootup and Utility Device	OK
		Power Supply Unit (CE)	OK
		Battery (BTU/BCU)	OK
	Frontend Enclosure		OK
		Frontend Router	OK
		Service Controller	OK
		Power Supply Unit (FE)	OK
		FAN Unit	OK
		Operation Panel	OK
	Drive Enclosure		OK
		I/O Module	OK
		Power Supply Unit (DE)	OK
	Drives		OK
		Performance (Drives)	OK
	Assign Global Hot Spare		OK
	Release Global Hot Spare		OK
	Assign Dedicated Hot Spare		OK
	Release Dedicated Hot Spare		OK
	Sanitize Drive		OK
	Turn on Locator Beacon/Turn off Locator Beacon		OK
	Add Drive Enclosure		OK
	Export Performance Information		OK
System
	System (Basic Information)		OK
	Network		OK
	Remote Support		OK
		REMCS	OK
	Define Role		OK
	Eco-mode		OK
	Event/Dump		OK
	Audit Log		OK
	Firmware Maintenance		OK
	Storage Migration		OK
	External Drives		OK
	Utility		OK
	System Settings		OK
	Initial Setup		OK
	Change User Password		OK
	Set SSH Public Key		OK
	Set Deduplication/Compression Mode		OK
	Enable RESTful API		OK
	Register Non-disruptive Storage Migration License		OK
	Delete Non-disruptive Storage Migration License		OK
	System Management
		Modify Storage System Name	OK
		Modify Date and Time	OK
		Change Box ID	OK
		Setup Subsystem Parameters	OK
		Setup Encryption Mode	OK
		Setup SMI-S Environment	OK
		Register SED Authentication Key	OK
		Setup Power Management	OK
		Setup Exclusive Read Cache	OK
		Setup Disk Drive Patrol	OK
		Setup Debug Mode	OK
	Extreme Cache Pool
		Setup Extreme Cache Pool	OK
		Release Extreme Cache Pool	OK
	Utility Management
		Shutdown/Restart Storage System	OK
		Backup Configuration	OK
		Export Configuration	OK
		Start/Stop Performance Monitoring	OK
		Clear Cache	OK
	Eco-mode Management
		Modify Eco-mode General Setting	OK
		Create Eco-mode Schedule	OK
		Delete Eco-mode Schedule	OK
		Modify Eco-mode Schedule	OK
	User Management
		Setup User Account	OK
		Initialize User Account	OK
		Modify User Policy	OK
		Modify RADIUS	OK
		Add Role	OK
		Delete Role	OK
		Modify Role	OK
	Network Management
		Setup Network Environment	OK
		Setup Firewall	OK
		Setup SNMP Agent Basic Interface	OK
		Setup SNMP Manager	OK
		Setup SNMP Agent MIB Access View	OK
		Setup SNMP Agent User	OK
		Setup SNMP Agent Community	OK
		Setup SNMP Agent Trap	OK
		Download MIB File	OK
Send SNMP Trap Test		OK
Display SMTP Log		OK
Setup E-Mail Notification		OK
Setup Syslog		OK
Setup SSH Server Key		OK
Create Self-signed SSL Certificate		OK
Create Key/CSR		OK
Register SSL Certificate		OK
Setup SSL Security Configuration		OK
Event/Dump Management
	Setup Event Notification	OK
	Display/Delete Event Log	OK
	Export/Delete Log	OK
	Export/Delete Panic Dump	OK
Audit Log Management
	Enable Audit Log	OK
	Disable Audit Log	OK
	Setup Audit Log	OK
Storage Migration Management
	Start Storage Migration	OK
	Download Template File for Storage Migration Settings	OK
	Delete Storage Migration Path	OK
	Download Storage Migration Result	OK
	Restart Storage Migration	OK
	Suspend Storage Migration	OK
	Stop Storage Migration	OK
External Drive Management
	Create External Drive	OK
	Delete External Drive	OK
Remote Support Management (REMCS)
	Display Communication Log	OK
	Setup Remote Support	OK
	Update Customer Information	OK
	Update Communication Environment Information	OK
	Setup Log Sending Parameters	OK
	Stop/Restart Remote Support	OK
Firmware Management
	Apply Controller Firmware	OK
	Delete Controller Firmware Schedule	OK