Initialize QoS

Overview

This function initializes all the QoS settings (e.g. Host-LU QoS, volume QoS, and QoS patterns).

This function changes the bandwidth limit for hosts, ports, host LUNs, and volumes to the default value ("Unlimited") and deletes all the LU QoS groups.

Note that the following settings are not initialized.

  • QoS mode (enabled/disabled)

  • Host-LU QoS performance information acquisition state (started/stopped)

Operating Procedures

In this screen, initialize the QoS settings.

  1. Click [Initialize QoS] in [Action].

    → A confirmation screen appears.

  2. Click the [OK] button.

    → The QoS initialization starts.

  3. Click the [Done] button to return to the [Host-LU QoS] screen.