Delete Controller Firmware Schedule

Overview

This function deletes the application schedule for the controller firmware.

Caution
  • If any of the following conditions occur, the reservation for deleting the schedule is automatically canceled.
    • The application schedule for the controller firmware is reserved

      • Rebooting of the storage system

      • Power failure or power recovery

      • Machine down recovery

      • The system time in the storage system is changed to a time that is later than the reserved time

    • Start time to apply the controller firmware

      • Other users perform system settings

      • Pinned data exists in the storage system

    • The start time to apply controller firmware (when the application mode is "Update")

      • The storage system is not in normal status

      • The battery status is not "Full Charge"

      • REC sessions with the following conditions appear

        • A blocked copy path is being used and the session status is not "Suspend" or "Error Suspend"

        • The mirror status of the REC Buffer that is being used is "Recovering" and the session status is not "Suspend" or "Error Suspend"

      • A storage migration path exists

      • RAID Group Expansion (LDE) is being used

      • A volume is being encrypted

Note

  • When the application schedule for the controller firmware is specified, the start time is displayed in the information field. Refer to the [Firmware Maintenance] function for details.

  • When controller firmware is applied in simple mode, the application schedule can be set. Refer to the [Apply Controller Firmware] function for details.

Operating Procedures

  1. Click [Delete Firmware Schedule] in [Action].

    → A confirmation screen appears.

  2. Click the [OK] button.

    Deletion of the application schedule for the controller firmware starts.

  3. Click the [Done] button to return to the [Firmware Maintenance] screen.