Enable Audit Log

Overview

This function enables the audit log function.

Caution

  • Enable the "Audit Log" setting, and then specify the destination external server. Refer to the [Setup Audit Log] function for details. Audit logs are sent after the external server is specified.

  • Note that the storage system does not save the audit log. The audit log is only sent to the specified external server.

Note
  • The conditions for collecting audit logs are as follows:

    • The interface must be Web GUI, CLI, or software that accesses the storage system via CLI or SMI-S

    • The user who logs in or is newly logged in when the external server is set after the "Audit Log" is enabled

    • Audit log collection target operations (*1)

      *1  :  Refer to the [Audit Log] function for details about log collection target operations.

Operating Procedures

  1. Click [Enable Audit Log] in [Action].

    → A confirmation screen appears.

    Caution

    • If the audit log function has already been enabled, [Enable Audit Log] cannot be clicked.

  2. Click the [OK] button.

    → Enabling of the audit log starts.

  3. Click the [Done] button to return to the [Audit Log] screen.