Network
Overview
This function displays the network environment of each port in the storage system.
Click the [] icon to display the latest screen. Note that after changing the firewall setting and returning to this screen, it takes approximately 10 seconds to update the display contents. Wait at least 10 seconds and click the [] icon or click [Network] in category to display the [Network] screen again.
Display Contents
Click the [IPv4 Settings] Tab, the [IPv6 Settings] Tab, or the [Firewall] Tab to display the network setting information.
The SNMP Information, the E-Mail Information, and the SSL Security Information are displayed under the network setting information.
[IPv4 Settings] Tab
| Item | Description |
|---|---|
Port |
The port type is displayed. MNT RMT FST |
Speed and Duplex |
The transfer speed and the communication method are displayed. Auto-negotiation 1Gbit/s 100Mbit/s Half 100Mbit/s Full 10Mbit/s Half 10Mbit/s Full |
Primary IP Address |
The IP address of the Main CM, which has been specified to the port, is displayed. If not specified, the field is blank. |
Secondary IP Address |
The IP address of the Sub CM, which has been specified to the port, is displayed. This item is not displayed for the 1CM model. If not specified, the field is blank. |
Subnet Mask |
The Subnet Mask, which has been specified to the port, is displayed. If not specified, the field is blank. |
[IPv6 Settings] Tab
| Item | Description |
|---|---|
Port |
MNT RMT FST |
Speed and Duplex |
The transfer speed and the communication method are displayed. Auto-negotiation 1Gbit/s 100Mbit/s Half 100Mbit/s Full 10Mbit/s Half 10Mbit/s Full |
Primary IP Link Local Address |
The link local address of the Main CM, which has been specified to the port, is displayed. If not specified or when the port type is "FST", the field is blank. |
Primary Connect IP Address |
The connect IP address of the Main CM, which has been specified to the port, is displayed. "Primary Connect IP Address" corresponds to "Primary IP Address" for IPv4. If not specified or when the port type is "FST", the field is blank. |
Secondary IP Link Local Address |
The link local address of the Sub CM, which has been specified to the port, is displayed. This item is not displayed for the 1CM model. If not specified or when the port type is "FST", the field is blank. |
Secondary Connect IP Address |
The connect IP address of the Sub CM, which has been specified to the port, is displayed. "Secondary Connect IP Address" corresponds to "Secondary IP Address" for IPv4. This item is not displayed for the 1CM model. If not specified or when the port type is "FST", the field is blank. |
Length of Subnet Prefix |
The prefix length (3 to 128) for the connect IP address is displayed (unit: bit). "Length of Subnet Prefix" corresponds to "Subnet Mask" for IPv4. If not specified or when the port type is "FST", the field is blank. |
[Firewall] Tab
| Item | Description | |
|---|---|---|
Port |
The port type is displayed. MNT RMT FST |
|
Acceptable Protocol |
Web GUI (HTTP) |
Whether the HTTP connection is enabled or disabled is displayed. |
Web GUI (HTTPS) |
Whether the HTTPS connection is enabled or disabled is displayed. |
|
CLI (Telnet) |
Whether the Telnet connection is enabled or disabled is displayed. |
|
CLI (SSH) |
Whether the SSH connection is enabled or disabled is displayed. |
|
RESTful API(HTTPS) |
Whether the RESTful API connection is enabled or disabled is displayed. |
|
SMI-S (HTTP) |
Whether the SMI-S (HTTP) connection is enabled or disabled is displayed. Whether SMI-S (HTTP) connection is enabled or disabled is displayed for the MNT port and the RMT port. The FST port is always disabled. |
|
SMI-S (HTTPS) |
Whether the SMI-S (HTTPS) connection is enabled or disabled is displayed. Whether SMI-S (HTTPS) connection is enabled or disabled is displayed for the MNT port and the RMT port. The FST port is always disabled. |
|
SMI-S (SLP) |
Whether the SMI-S (SLP) connection is enabled or disabled is displayed. Whether SMI-S (SLP) connection is enabled or disabled is displayed for the MNT port and the RMT port. The FST port is always disabled. |
|
ICMP |
Whether the ICMP connection is enabled or disabled is displayed. |
|
Maintenance-Secure |
Whether the Maintenance-Secure connection is enabled or disabled is displayed. |
|
SNMP |
Whether the SNMP connection is enabled or disabled is displayed. |
|
RCIL |
Whether the RCIL connection is enabled or disabled is displayed. Whether RCIL connection is enabled or disabled is only displayed for the MNT port. The RMT port and the FST port are always disabled. |
|
SNMP Information
| Item | Description |
|---|---|
SNMP Function |
Whether the SNMP function is enabled or disabled is displayed. |
E-Mail Information
| Item | Description |
|---|---|
Notification E-Mail |
Whether the E-mail notification is enabled or disabled is displayed. |
SSL Security Information
| Item | Description | |
|---|---|---|
| Allow only ECDHE Ciphers | If ECDHE encryption is allowed, "Yes" is displayed, otherwise "No" is displayed. | |
Version |
HTTPS (GUI/REST) |
All the versions (TLS1.2 and TLS1.3) that are currently available for the HTTPS (GUI/REST) protocol are displayed. The SSL version setting (enabled or disabled) is applied to all ports (MNT/RMT/FST). |
HTTPS (SMI-S) |
All the versions (TLS1.2 and TLS1.3) that are currently available for the HTTPS (SMI-S) protocol are displayed. The SSL version setting (enabled or disabled) is applied to all ports (MNT/RMT/FST). |
|
Maintenance-Secure |
All the versions (TLS1.2 and TLS1.3) that are currently available for the Maintenance-Secure protocol are displayed. The SSL version setting (enabled or disabled) is applied to all ports (MNT/RMT/FST). |
|
If "Yes" is displayed for "Allow only ECDHE Ciphers", SSL communication is performed with "TLS1.2". This feature is applied to all protocols (HTTPS (GUI/REST)/HTTPS (SMI-S)/Maintenance-Secure).