Installation Methods

Perform one of the following rack installation methods to ensure the safe use of an ETERNUS DX that is installed in a rack:
- To secure a rack, use a rack without stabilizers and secure it to the building with the leveling feet.
- If a rack is not to be secured, make sure to use a rack with stabilizers and use these stabilizers to prevent the rack from toppling over.
Which installation method should be used depends on the installation location, the floor conditions, and the type of racks that are to be used. Contact your installation contractor for more details regarding installation and how the installation should actually be performed.

An installation diagram when installing a rack (or the floor dimensions of the rack) is shown below.

Figure: Floor Dimensions of the Rack