Package Size
The ETERNUS DX is shipped in cardboard boxes or in a rack. These boxes may not fit through some doorways or elevators. To make sure that the ETERNUS DX can be moved to the installation site, carefully check the transport route information.
The following table shows the package size and the maximum package weight of each component for regions other than the EMEIA, Central American, and Caribbean regions.
Component |
Package size (W × D × H) |
Maximum weight |
|
|---|---|---|---|
19-inch rack (base/expansion rack) |
780 × 1,130 × 2,000mm |
Approximately 760kg (*1) |
|
Frontend enclosure (ETERNUS DX900 S6 and ETERNUS DX8900 S6) |
940 × 640 × 500mm |
Approximately 75kg |
|
Controller enclosure |
1,000 × 620 × 470mm |
Approximately 70kg |
|
Drive enclosure |
2.5" NVMe type |
620 × 810 × 310mm |
Approximately 40kg |
2.5" SAS type |
600 × 660 × 240mm |
Approximately 40kg |
|
3.5" SAS type |
600 × 660 × 240mm |
Approximately 40kg |
|
Drive (*2) |
2.5" NVMe type |
160 × 278 × 106mm |
Approximately 0.5kg |
2.5" SAS type |
|||
3.5" SAS type |
189 × 300 × 116mm |
Approximately 1.2kg |
|
Power distribution unit |
1U |
540 × 380 × 310mm |
Approximately 5kg |
2U |
(540 × 380 × 310mm) × 2 |
(Approximately 10kg) × 2 |
|
| *1 | : | This value is for when the maximum number of enclosures are installed in the rack. |
| *2 | : | When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the drives preinstalled. When optional drives are ordered without preinstallation, each drive is shipped in an individual package. |