Remote Connections
An FC or iSCSI interface is available for a remote connection.
When a remote connection is used, change the host interface port mode setting from "CA" to "RA".
Caution
When different types of remote interfaces exist in the same ETERNUS AF/DX, make sure to use the same type of interface for each REC path. For example, the following configuration is not supported because different types of interfaces (FC and iSCSI) exist together on an REC path.
Figure: Example of Non-Supported Connection Configuration (When Multiple Types of Remote Interfaces Are Installed in the Same ETERNUS AF/DX)
The following configuration is supported because the same type of interface is used for each REC path.
Figure: Example of Supported Connection Configuration (When Multiple Types of Remote Interfaces Are Installed in the Same ETERNUS AF/DX)