MNT Ports/RMT Ports/FST Ports

This port is used for connecting a LAN cable. The MNT port is used for operation management and the FST port is used for maintenance. Use the RMT port to separate the network (such as for the remote support) from the MNT port for operation management.

The specifications for the MNT port, the RMT port, and the FST port are shown below.

Table: MNT Port/RMT Port/FST Port Specifications

Interface

Transfer rate (max.)

Connector type

Number of ports for each controller

Ethernet (1000BASE-T/100BASE-TX/10BASE-T)

1Gbit/s

RJ-45

1 (MNT)

1 (RMT)

1 (FST)