Set Host Response

The host response configures the appropriate operation mode on which the host makes connection. In normal host connection, the recommended patterns prepared for each OS type in advance or the default settings are used.

Table: Recommended Patterns of Host Responses

Host response name

Connection environment

Solaris MPxIO

Set this parameter to connect to an Oracle Solaris host and to use the OS standard Multipath Driver (MPxIO).

HP-UX

Set this parameter to connect to an HP-UX host.

AIX

Set this parameter to connect to an AIX host.

AIX VxVM

Set this parameter to connect to an AIX host and to use Veritas Volume Manager (VxVM).

VS850/SVC

Set this parameter to connect to an ETERNUS VS850 Virtualization Storage or an IBM SAN Volume Controller (SVC).

BS2000

Set this parameter to connect to a BS2000 host.

Default

Set this parameter for any host connection environments that are not listed above.

For details on assigning an appropriate host response, refer to "Configuration Guide -Server Connection-". For details on modifying the host response settings, refer to "Operating Procedures" in "Add Host Response" of "Web GUI User's Guide".