ONTAP 9.14.1 commands

network arp active-entry show

Display active ARP entries organized by Vserver

Availability: This command is available to cluster administrators at the advanced privilege level.

Description

The `network arp active-entry show ` command displays ARP entries present in the network stack of the node. The entries includes both dynamically learned ARP entries and user configured static ARP entries.

Parameters

{ [-fields <fieldname>,…​]

Use this parameter to display only certain fields of the active ARP table.

| [-instance ] }

Use this parameter to display all the fields of the active ARP table.

[-node {<nodename>|local}] - Node

Use this parameter to display active ARP entries that are specific to a given node.

[-vserver <vserver>] - System or Admin Vserver Name

Use this parameter to display active ARP entries that are specific to a given System or Admin Vserver. Data and Node Vservers will not have any active-arp entries.

[-subnet-group <IP Address/Mask>] - Subnet Group Name

Use this parameter to display active ARP entries that are specific to a given subnet group.

[-remotehost <text>] - Remote IP Address

Use this parameter to display active ARP entries for the specified IP address.

[-port <text>] - Port

Use this parameter to display active ARP entries for the specified Port name.

[-mac <text>] - MAC Address

Use this parameter to display the active ARP entry for the specified MAC address.

[-ipspace <IPspace>] - IPspace

Use this parameter to specify the IPspace associated with the System or Admin Vserver.

Examples

The following example displays active ARP entries for the Admin Vserver cluster1:

cluster1::*> network arp active-entry show -vserver cluster1

Node: node-01
Vserver: cluster1
Subnet Group: 169.254.0.0/16
Remote IP Address MAC Address       Port
----------------- ----------------- -------
169.254.106.95    0:55:39:27:d1:c1  lo
Top of Page