ONTAP 9.14.1 commands

vserver nvme subsystem host add

Add a host to a subsystem

Availability: This command is available to cluster and Vserver administrators at the admin privilege level.

Description

The vserver nvme subsystem host add command adds an FC-NVMe host to an NVMe subsystem on a Vserver.

Parameters

-vserver <Vserver Name> - Vserver Name

Specifies the Vserver.

-subsystem <text> - Subsystem

Specifies the NVMe target subsystem.

-host-nqn <text> - Host NQN

Specifies the NVMe subsystem host NQN.

[-priority {regular|high}] - Host priority

Specifies the Host priority.

[-dhchap-host-secret-key <text>] - Authentication Host Secret

Specifies the NVMe DH-HMAC-CHAP in-band authentication host secret.

[-dhchap-controller-secret-key <text>] - Authentication Controller Secret

Specifies the NVMe DH-HMAC-CHAP in-band authentication controller secret.

[-dhchap-hash-function {sha-256|sha-512}] - Authentication Hash Function

Specifies the NVMe DH-HMAC-CHAP in-band authentication hash function.

[-dhchap-dh-group {none|2048-bit|3072-bit|4096-bit|6144-bit|8192-bit}] - Authentication Diffie-Hellman Group

Specifies the NVMe DH-HMAC-CHAP in-band authentication Diffie-Hellman group size.

Examples

cluster::*> vserver nvme subsystem host add -vserver vs_1 -subsystem sub_1 -host-nqn nqn.2001-01.com.example:nvme-host1

Adds a host with the specified NQN to the NVMe subsystem sub_1 on Vserver vs_1 .

Top of Page