ONTAP 9

to Japanese version

Considerations for LIFs in cluster SAN environments

You must be aware of certain LIF considerations in a SAN environment.

  • Initiators must use Multipath I/O (MPIO) and asymmetric logical unit access(ALUA) for failover capability for clusters in a SAN iSCSI or FC environment because SAN does not support automatic failover for LIFs.

  • At least one SAN LIF of the appropriate protocol must be configured on each node that hosts a mapped LUN and the node’s HA partner.

    You can configure two LIFs per node, one for each fabric being used with FC and to separate Ethernet networks for iSCSI.

  • Some options are not applicable for iSCSI or FC.

    For example, you cannot use IP addresses with FC.

Top of Page