Checking the Connection Status Between the Host and the Storage System
Perform the following procedure to check the connection status between the host and the storage system.
Click [Connectivity] in the navigation.
Click [FC] in the category.
→ The [FC Host] screen appears in the main screen.
Check the connection status between the relevant host and the storage system in the "Status" field.
When the host affinity settings are used
→ "Active" is displayed as the status. Proceed to Required Storage System Settings After HBA Replacement (When Host Affinity Settings are Used).
When the host affinity settings are not used (conventional LUN mapping is used)
→ "Inactive" is displayed as the status. In this case, settings after replacing the HBA are not required. The replacement of the HBA is complete.