Delete Storage Migration Path

Overview

This function deletes path groups for the Storage Migration.

Caution
  • The path groups must be deleted after the data migration is complete. The following operations are not available before path groups are deleted:
    • Hot controller firmware upgrade at the destination storage system

    • Eco-mode schedule setting of the RAID group to which the destination volume belongs

    • Eco-mode schedule setting of the Thin Provisioning Pool (TPP) to which the destination volume belongs

    • Capacity expansion of the RAID group to which the destination volume belongs

    • RAID migration of the destination volume

    • Encryption of the destination volume

    • Capacity expansion of the destination volume

    • Deletion of the destination volume

    • Port mode modification of the destination FC-Initiator port

    • Port parameter setting of the destination FC-Initiator port

    • Reduction of the CA to which the destination FC-Initiator port belongs

Note
  • The path group can be deleted if all configured paths are in any of the following state:
    • "Source LUN Status" of the Storage Migration Volume List is "Not Exist".

    • "Migration Status" of the Storage Migration is "Normal End", "Stop", "Initial", or "Waiting".

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Operating Procedures

  1. Select the path group that is to be deleted (multiple selections can be made) and click [Delete Path] in [Action].

    → A confirmation screen appears.

  2. Click the [OK] button.

    → Deletion of the Storage Migration path starts.

  3. Click the [Done] button to return to the [Storage Migration] screen.