Firmware Maintenance
Overview
This function performs the maintenance operation for the firmware that is managed in the storage system.
Firmware maintenance is performed to update the firmware version. The firmware can be applied after being registered in the Bootup and Utility Device (BUD).
There are two types of firmware; "controller firmware" and "disk firmware".
Refer to the following table to determine whether to stop the host I/O when applying firmware.
Firmware | Stop Host I/O |
---|---|
Controller Firmware |
Not required (*1) |
Disk Firmware |
Required |
*1 | : | Switching the path in the multipath configuration may be required. |
- When the application schedule for the controller firmware is being reserved, the following occurs.
The warning message ""Apply Controller Firmware" is scheduled." is displayed.
The [Apply Controller Firmware] function is automatically started at the date and time that are displayed in the information field according to the application mode that is used. When the application mode is "Update & Reboot", the storage system is automatically rebooted after the controller firmware is applied.
[Apply Firmware] is not displayed in [Action].
If an application schedule for the controller firmware is not reserved, [Delete Firmware Schedule] is not displayed in [Action].
If the message which indicates that the controller firmware application has been reserved disappears before the reserved application date, the reservation may be canceled automatically. In this case, reserve the application schedule for the controller firmware again. Refer to the [Apply Controller Firmware] function for details.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Display Contents
Controller Firmware Information
Item | Description |
---|---|
Current Firmware Version |
The current controller firmware version is displayed. VxxLyy-zzzz Vxx: Version Lyy: Level zzzz: Release number |
Firmware Version after Restart |
The controller firmware version after the next power on is displayed. VxxLyy-zzzz Vxx: Version Lyy: Level zzzz: Release number |