Setup Drive Monitor Parameters

Overview

This function updates the drive monitor parameters.

The "drive monitor parameter" is a threshold for the number of errors to detect for a drive failure.

Caution
  • Follow the Support Department instructions when this function is required.

Note
  • The updated drive monitor parameter is applied immediately to the storage system.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin  
StorageAdmin  
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Display Contents

The drive monitor parameters version information is displayed.

Drive Monitor Parameters Version Information

Item Description

Current Version

The current drive monitor parameter version is displayed.

CxxUxxxx

x: hexadecimal (0 - f)

Version within Firmware

The drive monitor parameter version in the controller firmware is displayed.

CxxUxxxx

x: hexadecimal (0 - f)

Settings

In this screen, set the drive monitor parameters file.

Drive Monitor Parameters File Settings

Item Description Setting values

File

Select the drive monitor parameter file to set.

Drive monitor parameters file

Operating Procedures

  1. Click [Setup Drive Monitor Parameters] in [Action].

  2. Specify the drive monitor parameters file, and click the [Set] button.

    → A confirmation screen appears.

    Caution
    • If the drive monitor parameters file version is incorrect, an error occurs.

  3. Click the [OK] button.

    → The drive monitor parameters file is updated.

  4. Click the [Done] button to return to the [Utility] screen.