Modify Threshold Thin Provisioning Pool
Overview
This function changes the threshold for monitoring the used capacity of a Thin Provisioning Pool (TPP). There are two types of threshold: "Warning" and "Attention".
This function can change the threshold of TPPs created using the [Create Thin Provisioning Pool] function.
Using this function enables setting the same threshold to multiple TPPs with a single operation.
- Changes in the usage status of a TPP can be notified. The following statuses can be notified. Refer to the [Setup Event Notification] function for details.
From "Normal" to "Attention"
From "Normal" or "Attention" to "Warning"
The TPP capacity is exhausted
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
In this screen, change the TPP threshold.
Threshold Setting
Item | Description | Setting values |
---|---|---|
Warning |
Change the warning threshold (%) for monitoring the TPP used capacity. Specify the warning threshold so that the "Warning" threshold is the same or larger than the "Attention" threshold. |
5 - 99 % 90 % (Default) |
Attention |
Specify the attention threshold (%) for monitoring the TPP used capacity. Specify the Attention threshold so that the "Warning" threshold is the same or larger than the "Attention" threshold. The "Attention" threshold can be omitted. When setting the "Attention" threshold, select the checkbox. |
Checkbox Selected 5 - 80 % Cleared Default: Checkbox is selected 75 % |
Display Contents
In this screen, TPPs that are selected in the [Thin Provisioning Pool] screen are displayed. Confirm the TPP for which the threshold is to be changed.
Target Thin Provisioning Pool
Item | Description | |
---|---|---|
Name |
The TPP name is displayed. |
|
Drive Type |
The type of drive that configures the TPP is displayed. |
|
RAID Level |
The level of RAID group that configures the TPP is displayed. High Performance (RAID1+0) High Capacity (RAID5) High Reliability (RAID6) High Reliability (RAID6-FR) Mirroring (RAID1) Striping (RAID0) |
|
Status |
The TPP status is displayed. Refer to "Thin Provisioning Pool Status" for details. |
|
Total Capacity |
The total capacity of TPP is displayed. |
|
Current |
Used Status |
The current usage of the TPP is displayed.
TPP usage = Used Capacity ÷ Total Capacity |
Warning |
The "Warning" threshold (5 to 99 %) currently set for the TPP is displayed. |
|
Attention |
The "Attention" threshold (5 to 80 %) currently set for the TPP is displayed. When the "Attention" threshold is omitted, a "-" (hyphen) is displayed. |
Operating Procedures
In this screen, change the TPP threshold.
Select the TPP for which the threshold is to be changed (multiple selections can be made) and click [Modify Threshold] in [Action].
Select a new threshold, and click the [Modify] button.
→ A confirmation screen appears.
CautionWhen "Warning" is not larger than "Attention", an error screen is displayed.
NoteWhen changing a "Attention" threshold, select the checkbox and then select a new threshold.
When omitting the "Attention" threshold, clear the checkbox.
Click the [OK] button.
→ The threshold settings for Thin Provisioning Pools starts.
Click the [Done] button to return to the [Threshold] screen.