Event/Dump
Overview
The description on the actions that can be started from the [Event/Dump] screen is displayed.
Actions
The following functions can be used from the "Event/Dump" screen:
Web GUI User's Guide
Web GUI User's Guide
C140-0005-01ENZ3
- Web GUI Overview
- Volume
- Volume (Basic Information)
- Create Volume
- Delete Volume
- Rename Volume
- Format Volume
- Expand Volume
- Expand Thin Provisioning Volume
- Start RAID Migration
- Stop RAID Migration
- Stop External Volume Data Synchronization
- Set Allocation
- Optimize TPV/FTV Capacity
- Cancel Optimizing TPV/FTV Capacity
- Delete Snap Data Pool Volume
- Force Delete Snap Data Pool Volume
- Modify Thin Provisioning Volume Threshold
- Initialize Snap Data Volume
- Encrypt Volume
- Forbid Advanced Copy
- Permit Advanced Copy
- Delete External LU Information
- Change Data Reduction Processing CM
- Performance (Host I/O)
- Performance (QoS)
- Performance (Advanced Copy)
- LUN Group
- Reservation
- Pinned Data
- Bad Sector
- Balancing Thin Provisioning Volume
- Volume (Basic Information)
- RAID Group
- Thin Provisioning
- Advanced Copy
- Connectivity
- Connectivity
- Host Group
- CA Port Group
- LUN Group
- Host Response
- CA Reset Group
- Host-LU QoS
- Component
- System
- System
- Network
- Setup Network Environment
- Setup Firewall
- Setup SNMP Agent Basic Interface
- Setup SNMP Manager
- Setup SNMP Agent MIB Access View
- Setup SNMP Agent User
- Setup SNMP Agent Community
- Setup SNMP Agent Trap
- Download MIB File
- Send SNMP Trap Test
- Display SMTP Log
- Setup E-Mail Notification
- Setup Syslog
- Setup SSH Server Key
- Create Self-signed SSL Certificate
- Create Key/CSR
- Register SSL Certificate
- Setup SSL Security Configuration
- Remote Support
- Define Role
- Eco-mode
- Event/Dump
- Audit Log
- Firmware Maintenance
- Storage Migration
- External Drives
- Extreme Cache Pool
- Utility
- Reset Backup/Restore Fail
- Reset Machine Down Recovery Fail
- Force Write Back
- Clear Sense Data
- Initialize BUD
- Force Restore
- Force Restore Thin Provisioning
- Change Main CM
- Reboot All CMs
- Shutdown/Restart Storage System
- Apply Configuration
- Cancel Applying Configuration
- Backup Configuration
- Export Configuration
- Start/Stop Performance Monitoring
- Clear Cache
- System Settings
- Appendix
- User Roles and Policies
- Status List
- Glossary (A - Z)
- Factory Default List
- Detailed Information for RAID Levels, Drives, and Volumes
- Supported Functions for Each Controller Firmware Version
- Supported Functions for Each Model
- Naming Conventions of Volumes, Hosts, and External RAID Groups
- Basic Size and MWC Input Condition for RAID Levels
- Basic Size for each RAID Level
- Basic Size When Using the Default Stripe Depth Value (For Standard Type Volumes, TPVs, or SDPVs)
- Basic Size When Using the Default Stripe Depth Value (For WSVs)
- Basic Size When Stripe Depth Is Tuned (For Standard Type Volumes, TPVs, or SDPVs)
- Basic Size When Stripe Depth Is Tuned (For WSVs)
- Basic Size When Stripe Depth Is Tuned (For TPP Capacity)
- Allowed Input for MWC
- Basic Size for each RAID Level
- Using RADIUS Authentication
- Setting Procedures for Replacing HBAs
- Advance Preparation
- Overview of the Procedure
- Checking the Connection Status Between the Host and the Storage System
- Required Storage System Settings After HBA Replacement (When Host Affinity Settings are Used)
- Required Storage System Settings After HBA Replacement (When Host Affinity Settings are not Used)
