Setup SSL Security Configuration
Overview
This function sets the security method of the SSL communication to provide more secure communication.
Enable the SSL version for HTTPS (GUI/REST) that is used for communication between the storage system and the setting PC. If the enabled SSL version setting used for communication is different between the storage system and the setting PC (web browser), access to the storage system from Web GUI is not allowed.
After the SSL version for "HTTPS (GUI/REST)" is specified, the new SSL session is applied from the next access (screen transition).
The SSL version that is specified with this function is applied to all LAN ports (MNT/RMT/FST).
Settings
SSL Cipher Setting
| Item | Description | Setting values |
|---|---|---|
Allow only ECDHE Ciphers |
If only ECDHE ciphers are allowed, select "Yes". Otherwise, select "No". |
Yes No (Default) |
SSL Version Settings
| Item | Description | Setting values |
|---|---|---|
HTTPS (GUI/REST) |
Select the SSL version to enable for the HTTPS (GUI/REST) protocol. Select the checkbox to enable the SSL version. |
Selected: Enabled (Default) Cleared: Disabled |
HTTPS (SMI-S) |
Select the SSL version to enable for the HTTPS (SMI-S) protocol. Select the checkbox to enable the SSL version. |
Selected: Enabled (Default) Cleared: Disabled |
Maintenance-Secure |
Select the SSL version to enable for the Maintenance-Secure protocol. Select the checkbox to enable the SSL version. |
Selected: Enabled (Default) Cleared: Disabled |
Operating Procedures
Click [Setup SSL Security Configuration] in [Action].
Specify the parameters, and click the [Set] button.
→ A confirmation screen appears.
Click the [OK] button.
→ The SSL security setting starts.
Click the [Done] button to return to the [Network] screen.