Change Data Reduction Processing CM

Overview

This function changes the Data Reduction Processing CM that is allocated to the Deduplication/Compression Volume.

"Data Reduction Processing CM" is a CM that controls the data reduction process during a deduplication/compression. This function is used to perform a memory balancing and load distribution of the CMs during a data reduction process.

This function is displayed only when the Deduplication/Compression function is enabled.

Caution

  • This function cannot change the Data Reduction Processing CMs for Data Container Volumes. Use CLI to change the setting. Note that the "Maintenance Operation" policy is required for this operation.

  • This function cannot be used under the following conditions:

    • A CE that is not in the "Normal" state exists

    • A CM that is in a state other than "Normal" and "Warning" exists when "Automatic" is selected for "New Data Reduction Processing CM"

    • A CM that is not in the "Normal" state exists if an option other than "Automatic" is selected for "New Data Reduction Processing CM"

Settings

Select the new Data Reduction Processing CM.

Data Reduction Processing CM Settings

Item Description Setting values

New Data Reduction Processing CM

Select the new Data Reduction Processing CM.

"Automatic" and the normal CM number ("CE#n CM#n" or "CM#n") that is installed are displayed as options.

If "Automatic" is selected, the controlling CM is assigned to balance the load of the data reduction process in the normal CMs.

Automatic

For the ETERNUS DX900 S6 or the ETERNUS DX8900 S6

CE#n CM#n

For the ETERNUS DX600 S6 or the ETERNUS DX8100 S6

CM#n

Display Contents

Detailed information of the selected Deduplication/Compression Volume is displayed.

Target Thin Provisioning Volume

Item Description

No.

The volume number is displayed.

Name

The volume name is displayed.

Type

The volume type is displayed.

TPV

Usage

The usage of the volume is displayed.

Refer to Usage of Volumes for details.

Status

The volume status is displayed.

Refer to Volume Status for details.

Current Data Reduction Processing CM

The Data Reduction Processing CM that is currently allocated to the volume is displayed.

CE#n CM#n or CM#n

Operating Procedures

  1. Select the Deduplication/Compression Volume to change the Data Reduction Processing CM (multiple selections can be made) and click [Change Data Reduction Processing CM] in [Action].

    Caution

    • [Change Data Reduction Processing CM] cannot be clicked if a volume other than the Deduplication/Compression Volume is selected.

  2. Select a new Data Reduction Processing CM, and click the [Change] button.

    → A confirmation screen appears.

  3. Click the [OK] button.

    → Changing Data Reduction Processing CM starts.

  4. Click the [Done] button to return to the [Volume] screen.