Add FC Host
Overview
This function registers a new FC host (HBA).
The following list shows the maximum number of hosts (*1) that can be registered for each storage system model.
ETERNUS DX60 S5: 128
ETERNUS DX100 S5/DX200 S5: 1024
ETERNUS DX500 S5/DX600 S5: 4096
ETERNUS DX8100 S4: 1024
ETERNUS DX900 S5 or ETERNUS DX8900 S4: 8192
ETERNUS AF150 S3/AF250 S3: 1024
ETERNUS AF650 S3: 4096
*1 | : | Total of all hosts, regardless of the interface type. |
This action item is only displayed when the "Use "Add Host"" checkbox is selected for the "Function to Add Host" field in "Web GUI Settings". This checkbox is not selected (this function is not displayed) by default. Refer to the [Setup Subsystem Parameters] function for details.
-
Note that this function does not create a host group. The storage system also has a function that creates new host groups to register hosts as their members. Refer to the [Add FC Host Group] function for details.
Hosts that are registered with this function can belong to host groups. However, only one LUN group can be allocated to a combination of host and port when configuring host affinity.
Refer to "Configuration Guide -Server Connection-" for each OS type to assign an appropriate host response to the host that is to be registered. A host response has a recommended pattern which has been prepared for each OS type. Refer to "Recommended Patterns of Host Responses" for details. If an appropriate host response is not configured to the host, the path may not be switched correctly or the volume may not be recognized correctly.
-
To change the FC host information, use the [Modify FC Host] function.
The host affinity setting can be specified for each FC host. Refer to the [Create Host Affinity] function for details.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
Host Setting
In this screen, register the FC hosts.
Item | Description |
---|---|
Number of Hosts |
The number of hosts that are to be registered is displayed. The number of hosts to be registered is determined by the total for the number of hosts selected from the host list and the number of manually specified hosts. For the ETERNUS DX60 S5 0 - 128 For the ETERNUS DX100 S5/DX200 S5 0 - 1024 For the ETERNUS DX500 S5/DX600 S5 0 - 4096 For the ETERNUS DX8100 S4 0 - 1024 For the ETERNUS DX900 S5 or the ETERNUS DX8900 S4 0 - 8192 For the ETERNUS AF150 S3/AF250 S3 0 - 1024 For the ETERNUS AF650 S3 0 - 4096 |
The following two methods are available to register a host.
Selecting the Registration Target Host from the List
This screen is displayed when the [Now Connected] tab is clicked. Select the hosts that are to be registered in the storage system and specify the FC host information.
Item | Description | Setting values |
---|---|---|
Checkbox to select a host |
Select the checkbox of the FC host that is to be registered in the storage system. The host name and host response can only be specified for the selected FC host. Caution
Note
|
|
Name |
Input the name of the FC host. An existing host name cannot be specified. |
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces |
WWN |
The FC host WWN is displayed. |
WWN |
Host Response |
Select a host response to be assigned to an FC host. A list of host responses that are created in the storage system is displayed. |
Default Solaris MPxIO HP-UX AIX AIX VxVM VS850/SVC BS2000 Host responses registered in the storage system |
Ports |
The location information of the CA port, which is connected to the FC host, is displayed. For the ETERNUS DX900 S5 or the ETERNUS DX8900 S4 CE#x CM#y CA#z Port#w For the other models CM#y CA#z Port#w x: CE number y: CM number z: CA number w: Port number |
Filter Setting
Function Description
Filter setting is a function used to display a list of only the FC hosts meeting all the specified conditions.
No filtering is set by default. The following table shows conditions that can be specified.
Item | Description | Setting values |
---|---|---|
WWN |
Input the WWN for the FC host that is to be displayed. FC hosts matching or partially matching the entered WWN are displayed. When not using the WWN for filtering, leave this item blank. |
WWN Blank |
Manually Specifying the Registration Target Host
This screen is displayed when the [Manual Input] tab is clicked. To register a new FC host that is not connected to the FC-CA port or the FC-CA/RA port, directly enter the FC host information.
[Add FC Host] Screen
Item | Description | Setting values |
---|---|---|
Name |
Input the name of the FC host. An existing host name cannot be specified. |
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces |
WWN |
Input the WWN for the FC host. |
Hexadecimal numbers (0 - 9, A - F, a - f) 16 digits (using "F (f)" or "0" in entire 16 digits is not allowed) |
Host Response |
Select a host response to be assigned to an FC host. A list of host responses that are created in the storage system is displayed. |
Default Solaris MPxIO HP-UX AIX AIX VxVM VS850/SVC BS2000 Host responses registered in the storage system |
Function Button
Button | Description |
---|---|
[Rediscover] |
Reacquire the FC hosts that are connected to the FC-CA port or the FC-CA/RA port. The [Rediscover] button is displayed in the [Now Connected] screen. Clicking the [Rediscover] button updates the FC host list. The [Rediscover] button clears the checkboxes for the selected FC hosts. Note that any FC host information that is specified in the [Manual Input] screen is retained. |
[Add] |
Adds FC host information by manual entry. The [Add] button is displayed in the [Manual Input] screen. If the maximum number of hosts has already been registered, the [Add] button cannot be clicked. |
[Delete] |
Deletes the selected FC host information. The [Delete] button is displayed in the [Manual Input] screen. If no FC host has been added, the [Delete] button is not displayed. |
Operating Procedures
In this screen, register the FC hosts in the storage system.
-
Click [Add FC Host] in [Action].
Add a host in the storage system in the following procedures.
- Selecting the registration target host from the list
Click the [Now Connected] tab.
Select the host that is to be registered from the FC host list, input the FC host information, and click the [Add] button.
→ A confirmation screen appears.
CautionIf the WWN is not displayed when clicking the [Rediscover] button, make sure that there is no error in the connection environment, such as the connection between the host and the switch, and the CA port settings of the storage system. If there is no error in the connection environment, contact the Support Department, or specify the WWN manually.
- An error screen appears in the following conditions:
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" is already used for the registration target host or the same "Name" is already used in the storage system
The number of hosts that are to be registered is "0"
The number of registered hosts has exceeded the maximum number for the storage system
- Manually specifying the registration target host
Click the [Manual Input] tab.
Click the [Add] button.
→ The [Add FC Host] screen appears.
Specify the host information of the FC host that is to be registered, and click the [OK] button.
→ Returns to the [Manual Input] screen.
Caution- An error screen appears in the following conditions:
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" is already being used by the registration target host
The "WWN" is not entered
The "WWN" does not satisfy the input conditions
The "WWN" is already being used by the registration target host
- An error screen appears in the following conditions:
Repeat Step b and c when registering multiple FC hosts.
After registering the FC host is complete, click the [Add] button.
→ A confirmation screen appears.
Caution- An error screen appears in the following conditions:
The same "Name" has already been registered in the storage system
The same "WWN" has already been registered in the storage system
The number of hosts that are to be registered is "0"
The number of registered hosts has exceeded the maximum number for the storage system
- An error screen appears in the following conditions:
- Selecting the registration target host from the list
Click the [OK] button.
→ Registration of the FC host starts.
Click the [Done] button to return to the screen when starting this function in Step 1.
NoteClick the [Continue] button to continue registering FC hosts.