Add LUN Group
Overview
This function creates a new LUN group, and allocates a volume number in the storage system to the Logical Unit Number (host LUN), which can be referenced by the host.
The following list shows the maximum number of LUN groups that can be created for each model.
ETERNUS DX60 S5: 128
ETERNUS DX100 S5/DX200 S5: 1024
ETERNUS DX500 S5/DX600 S5: 2048
ETERNUS DX8100 S4: 1024
ETERNUS DX900 S5 or ETERNUS DX8900 S4: 6144
ETERNUS AF150 S3/AF250 S3: 1024
ETERNUS AF650 S3: 2048
Only the volumes with "Standard", "WSV", "TPV", "FTV", or "SDV" volume types can be registered in the LUN group.
Normally a LUN group cannot be created without registering volumes. However, it can be created if it is used for Veeam Storage Integration.
Up to 4096 LUNs can be created. If the host affinity setting is performed for the host groups or hosts to which the host response setting has been allocated, the number of LUNs that can be referenced by the host vary depending on the host response setting. Refer to "Host Response and Referable Number of LUNs" for details.
Note that if a LUN group to which volumes are mapped from LUN#512 onward exists, the maximum number of LUN groups cannot be created. This is because when volumes are mapped for LUN#512 onward, an additional LUN group is created as an internal resource for every 512 LUNs. For example, when volumes are mapped in LUN#0 and LUN#1024, three LUN groups are created (one for LUNs #0 to #511, one for LUNs #512 to #1023, and one for LUNs #1024 to #1535) even though no volumes are mapped between LUN#1 and LUN#1023.
- The following volumes cannot be registered in the LUN group. These volumes are not displayed as selectable volumes.
"SDPV" type volumes
Volumes with the mirroring reservation attribute (*1)
ODX Buffer volumes
NAS volumes and NAS system volumes that are used in a Unified Storage environment
Volumes that are used for the Storage Cluster function
Volumes that are used for the Virtual Volume function (including "$VVOL_META")
-
However, if the LUN group is used for Veeam Storage Integration, a Veeam Snapshot Volume is displayed as an option and can be registered in the LUN group.
*1 : An attribute to be set to a volume being created as the REC copy destination by the Dynamic LUN Mirroring function. The volumes with this attribute may have been left in the storage system due to unsuccessful creation. Volumes that have the mirroring reservation attribute can be checked in the "Forbid Advanced Copy" field on the [Volume] screen. Refer to the [Volume (Basic Information)] function for details.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
LUN Group Setting
In this screen, create a LUN group.
Item | Description | Setting values |
---|---|---|
Name |
Specify the LUN group name. An existing LUN group name cannot be specified. |
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces |
Number of LUNs |
The number of host LUNs (0 to 4096) to which the volumes are allocated is displayed. |
|
LUN Overlap |
If volumes in the LUN group satisfy one or both of the following conditions, "Yes" is displayed. For any other conditions, the field is blank.
|
|
If the LUN group is used for Veeam Storage Integration, select the "Yes" checkbox. If the LUN group is not used for Veeam Storage Integration, clear the checkbox. This item is displayed only when the Veeam Storage Integration License has been registered. |
Checkbox Selected Cleared (Default) |
Define LUN Group
The LUN and volume allocation information in the corresponding LUN group is displayed. Click the [Add] button to display the [Add LUN] Screen.
Item | Description |
---|---|
Checkbox to select a volume |
Select checkboxes for host LUNs and volume allocation information that are to be deleted from the LUN group. |
Host LUN |
The host LUN (0 to 4095) is displayed. |
Volume No. |
The volume number allocated to the host LUN is displayed. |
Name |
The volume name allocated to the host LUN is displayed. |
Type |
The volume type allocated to the host LUN is displayed. Standard WSV TPV FTV SDV |
Capacity |
The volume capacity allocated to the host LUN is displayed. When the "Type" is "SDV", the logical capacity, which can be accessed from the host, is displayed. |
LUN Group |
If the volume is allocated to different LUN groups, the LUN group name is displayed. If the host, ports, and LUNs are allocated without specifying a host group or port group by an application other than Web GUI, the location information of the ports is displayed. When a volume is not allocated to different LUN groups, the field is blank. For the ETERNUS DX900 S5 or the ETERNUS DX8900 S4 LUN group name CE#x CM#y CA#z Port#w Blank For the other models LUN group name CM#y CA#z Port#w Blank x: CE number y: CM number z: CA number w: Port number |
UID |
The volume UID allocated to the host LUN is displayed. The UID is an identifier (storage system name) to specify a volume from the open system server. 32-digit capital letters and numeric characters (hexadecimal) |
Function Button
Button | Description |
---|---|
[Add] |
Adds the host LUN and volume allocation information to the LUN group. If the allocation information has exceeded the maximum number, the [Add] button is not available. |
[Delete] |
Deletes the specified host LUN and the volume allocation information from the LUN group. If no host LUNs or volume allocation information exists, the [Delete] button cannot be clicked. |
[Add LUN] Screen
In this screen, allocate volumes to host LUNs.
LUN Setting
Use the radio button in the "Start Host LUNs" field, to specify the starting volume number, which will be allocated to a host LUN. By clicking the [OK] button, the selected volume numbers are allocated to the number of LUNs to be created, starting from the first LUN.
Item | Description | Setting values |
---|---|---|
Start Host LUNs |
Specify the host LUN from which volume allocation is to be started. Caution
|
0 - 4095 (decimal) The smallest number among the available host LUNs (Default) |
Number of LUNs |
Specify the number of host LUNs to which the volumes are allocated. |
1 (Default) - 4096 (decimal) |
Select Volume
Item | Description |
---|---|
Radio buttons to select a volume |
Select the radio button of the volume number that allocation is to be started from. Note
|
No. |
The volume number is displayed. |
Name |
The volume name is displayed. |
Type |
The volume type is displayed. Standard WSV TPV FTV SDV |
Capacity |
The volume capacity is displayed. When the "Type" is "SDV", the logical capacity, which can be accessed from the host, is displayed. |
LUN Group |
If the volume is allocated to different LUN groups, the LUN group name is displayed. If the host, ports, and LUNs are allocated without specifying a host group or port group by an application other than Web GUI, the location information of the ports is displayed. When a volume is not allocated to different LUN groups, the field is blank. For the ETERNUS DX900 S5 or the ETERNUS DX8900 S4 LUN group name CE#x CM#y CA#z Port#w Blank For the other models LUN group name CM#y CA#z Port#w Blank x: CE number y: CM number z: CA number w: Port number |
UID |
The volume UID is displayed. A "-" (hyphen) is displayed for the Data Container Volume. 32-digit capital letters and numeric characters (hexadecimal) Note
|
Operating Procedures
In this screen, create a LUN group.
Click [Add LUN Group] in [Action].
Specify the LUN group name.
Click the [Add] button.
→ The [Add LUN] screen is displayed.
NoteTo delete the allocation information between LUNs and volumes from the LUN group, select the checkbox for allocation information to delete and click the [Delete] button.
Specify the LUN and the number of LUNs for volume allocation, select the volume numbers to start the allocation to the corresponding LUNs from, and then click the [OK] button.
→ Returns to the [Add LUN Group] screen.
Caution- An error screen appears in the following conditions:
The LUN volume, which is specified in "Start Host LUNs", has already been allocated to a different LUN
The necessary number of LUNs, which have been specified in "Number of LUNs", cannot be allocated to the LUN volumes
- An error screen appears in the following conditions:
Repeat Step 3 and Step 4 to set multiple allocation information between the LUNs and the volumes.
Check the LUN and the volume allocation information to be registered in the LUN group, and then click the [Create] button.
→ A confirmation screen appears.
Caution- An error screen appears in the following conditions:
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" overlaps with an existing LUN group name
The total number of LUN groups has reached the maximum number of LUN groups for each model
The data merge process of a SnapOPC+ session is being performed for the specified volume
- An error screen appears in the following conditions:
Click the [OK] button.
→ Adding LUN group starts.
Click the [Done] button to return to the [LUN Group] screen.