Enable QoS/Disable QoS
Overview
This function enables or disables the QoS mode.
If the QoS mode is changed from "Enable" to "Disable", the configured bandwidth limit is saved.
If the QoS mode is changed from "Disable" to "Enable", the QoS operates within the saved bandwidth limit.
If the bandwidth limit is not specified when the QoS mode is changed to "Enable", "Unlimited" is applied to all the bandwidth limit settings for hosts, ports, host LUNs, and volumes (the setting value is not changed).
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to User Roles and Policies for details on the policies and roles.
Operating Procedures
Enabling QoS Mode
Click [Enable QoS] in [Action].
→ A confirmation screen appears.
CautionIf the QoS mode has already been enabled, [Enable QoS] cannot be clicked.
Click the [OK] button.
→ Enabling of QoS starts.
Click the [Done] button to return to the [Host-LU QoS] screen.
Disabling QoS Mode
Click [Disable QoS] in [Action].
→ A confirmation screen appears.
CautionIf the QoS mode has already been disabled, [Disable QoS] cannot be clicked.
Click the [OK] button.
→ Disabling of QoS starts.
Click the [Done] button to return to the [Host-LU QoS] screen.