Modify FC Host
Overview
This function changes the FC host information. The following host information can be changed.
Name
WWN
Host response allocation (only for FC hosts that are not registered in a host group)
-
When no FC hosts are registered, this function cannot be used.
-
When changing the WWN or the host response of an FC host that is currently being used, make sure to stop access to that FC host. The server must be rebooted after the host response is changed.
-
When the FC host is registered in a host group, use the [Modify Host Group] function to change the host response. Refer to the [Modify Host Group (FC)] function for details.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
FC Host Setting
In this screen, change the FC host information.
Item | Description | Setting values |
---|---|---|
Name |
Specify a new FC host name. An existing host name cannot be used. (Host names cannot overlap with any other host names, irrespective of the interface types.) |
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces |
WWN |
Specify a new WWN. The registered WWN cannot be used. |
Hexadecimal numbers (0 - 9, A - F, a - f) 16 digits (using "F (f)" or "0" in entire 16 digits is not allowed) |
Host Response |
Select a new host response that is to be assigned to the FC host. A list of host responses that are created in the storage system is displayed. This item is available only when an FC host is not registered in the host group. Caution
|
Default Solaris MPxIO HP-UX AIX AIX VxVM VS850/SVC BS2000 Host responses registered in the storage system |
Operating Procedures
In this screen, change the FC host information.
-
Select the FC host to change the host information for, and click [Modify FC Host] in [Action].
Input new host information and click the [Modify] button.
→ A confirmation screen appears.
Caution- An error screen appears in the following conditions:
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" already exists
The "WWN" is not entered
The "WWN" does not satisfy the input conditions
The same "WWN" is already registered in the storage system
There are some LUNs that cannot be referenced from the FC host because the "Host Response" setting has been changed (only for FC hosts that are not registered in a host group)
- An error screen appears in the following conditions:
Click the [OK] button.
→ Changing of the FC host information starts.
-
Click the [Done] button to return to the [FC Host] screen.