SAS Host

Overview

The registered SAS hosts in the storage system are displayed.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor
Admin
StorageAdmin
AccountAdmin  
SecurityAdmin
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Display Contents

SAS Host List

The registered SAS hosts in the storage system are displayed.

Caution
  • The SAS host is supported in the ETERNUS DX60 S5/DX100 S5/DX200 S5.

Item Description

No.

The SAS host number is displayed.

Name

The SAS host name is displayed.

SAS Address

The SAS address of the SAS host is displayed.

Host Group

The name of the host group to which the SAS host belongs is displayed.

If the SAS host does not belong to a host group, a "-" (hyphen) is displayed.

CA Port Group

The name of the CA port group that has the host affinity setting with the SAS host is displayed.

If no CA port group with the host affinity setting exists, a "-" (hyphen) is displayed.

CA Port

The location information of the CA port that has the host affinity setting with the SAS host is displayed.

If no CA port with the host affinity setting exists, a "-" (hyphen) is displayed.

CM#x CA#y Port#z

x: CM number

y: CA number

z: Port number

Host Response

The host response that is assigned to the SAS host or to the host group of the SAS host is displayed.

Default

Solaris MPxIO

HP-UX

AIX

AIX VxVM

VS850/SVC

BS2000

Host responses registered in the storage system

Status

Whether the SAS host is used ("Active") or not used ("Inactive") for the host affinity setting is displayed.

The host affinity setting specifies the path between each host and port.

  • Active

    The SAS host is used for the host affinity setting. The LUN group can be accessed from the SAS host.

  • Inactive

    The SAS host is not used for the host affinity setting.

Filter Setting

Function Description

Filter setting is a function used to display a list of only the SAS hosts meeting all the specified conditions.

No filtering is set by default. The following table shows conditions that can be specified.

Item Description Setting values

Name

Input the name for the SAS host that is to be displayed.

SAS hosts matching or partially matching the entered name are displayed.

When not using the name for filtering, leave this item blank.

Blank

SAS host name

SAS Address

Input the SAS address for the SAS host that is to be displayed.

SAS hosts matching or partially matching the entered SAS address are displayed.

When not using the SAS address for filtering, leave this item blank.

Blank

SAS address

Host Group

Input the name of the host group to which the SAS host that is to be displayed belongs.

SAS hosts matching or partially matching the entered host group name are displayed.

When not using the host group for filtering, leave this item blank.

Blank

Host group name

CA Port Group

Input the name of the CA port group that has the host affinity setting with the SAS host that is to be displayed.

SAS hosts matching or partially matching the entered CA port group name are displayed.

When not using the CA port group for filtering, leave this item blank.

Blank

CA port group name

CA Port

Select the CA port that has the host affinity setting with the SAS host that is to be displayed.

All

CM#x CA#y Port#z

x: CM number

y: CA number

z: Port number

Host Response

Select the name of the host response that is assigned to the SAS host that is to be displayed.

All

Default

Solaris MPxIO

HP-UX

AIX

AIX VxVM

VS850/SVC

BS2000

Host responses registered in the storage system

Status

Select the set state of the host affinity for the SAS host that is to be displayed.

All

Active

Inactive