Set SAS Host QoS
Overview
Configure the bandwidth limit (the maximum performance limit) of the SAS host.
This function is supported in the ETERNUS DX100 S5/DX200 S5.
This function can be used, irrespective of whether the QoS mode has been enabled or disabled. If the QoS mode has been disabled, the port starts the operation within the configured bandwidth limit after the QoS mode is enabled.
-
Configure the port bandwidth limit on each port. Refer to the [Set FC Port QoS] function, the [Set iSCSI Port QoS] function, or the [Set SAS Port QoS] function for details.
The host LUN bandwidth limit can be configured in the LU QoS group. Refer to the [Set Host-LU QoS] function for details.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to User Roles and Policies for details on the policies and roles.
Settings
SAS Host QoS Setting
Configure the bandwidth limit of the SAS host that is registered in the storage system.
Item | Description |
---|---|
Name |
The SAS host name is displayed. |
SAS Address |
The SAS address of the SAS host is displayed. |
Bandwidth Limit |
Select the maximum performance in IOPS (throughput value). When not setting the performance limit, select "Unlimited". Refer to the "Host QoS" column in "Bandwidth Limit" for the setting value and the default value. Note
|
Operating Procedures
Select the SAS host to configure a bandwidth limit (multiple selections can be made), and click [Set SAS Host QoS] in [Action].
Select the SAS host bandwidth limit, and click the [Set] button.
→ A confirmation screen appears.
Click the [OK] button.
→ The SAS host QoS setting starts.
Click the [Done] button to return to the [SAS Host QoS] screen.