Start SnapOPC+

Overview

This function is used to select the copy source volume and copy destination volume, and start a new SnapOPC+ copy session.

The Maximum Number of Sessions and the Maximum Number of Generations for Each Model

Model

The maximum number of sessions

(per storage system)

 The maximum number of generations (*1)
ETERNUS DX60 S5 1024 512
ETERNUS DX100 S5 2048
ETERNUS DX200 S5 4096

ETERNUS DX500 S5

ETERNUS DX600 S5

 8192
ETERNUS DX900 S5 32768
ETERNUS DX8100 S4 4096
ETERNUS DX8900 S4 32768
ETERNUS AF150 S3 2048
ETERNUS AF250 S3 4096
ETERNUS AF650 S3 8192
*1  :  The maximum number of generations for a SnapOPC+ from a single copy source volume.

Preparing Copy Destination Volumes

To use SnapOPC+, the same number of volumes as there are generations is required for the copy destination. Create any of the following volumes types in advance.

If the volume type of the copy destination is SDV, SDVs must be used for all generations. If the volume type of the copy destination is TPV or FTV, a mixture of TPVs and FTVs is available. Use TPV or FTV for each generation.

To create SDVs, SDPVs, or TPVs, use the [Create Volume] function. To create FTVs, use ETERNUS SF Storage Cruiser.

Caution

  • Registering the license for the Advanced Copy function is required to start a SnapOPC+ session.

  • Only SnapOPC+ copy sessions that are performed in units of volumes can be created using Web GUI. To create EC, OPC, QuickOPC, SnapOPC, SnapOPC+ sessions using range selection, and REC sessions, use copy management software.

  • ODX Buffer volumes and Data Container Volumes cannot be specified as the copy source.

  • External Volumes (or volumes whose "Usage" is "Migration") cannot be specified as the copy source or copy destination.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Settings

New Copy Session

Item Description Setting values

Type

Select the new copy session type.

SOPC+ (Default)

SnapOPC+ Session Setting

Item Description Setting values

Source Volume

Click the [Browse...] button to display the [Select Source Volume] screen. Select the copy source volume in the [Select Volume] screen.

Copy source volume name

Destination Volume

Click the [Browse...] button to display the [Select Source Volume] screen. Select the copy destination volume in the [Select Volume] screen.

Copy destination volume name

[Select Source Volume] Screen / [Select Destination Volume] Screen

In the [Select Source Volume] screen, a list of volumes of "Standard", "WSV", "TPV", and "FTV" types is displayed.

In the [Select Destination Volume] screen, a list of volumes of "SDV", "TPV", and "FTV" types is displayed.

The radio buttons are displayed for the volumes that can be used for the copy source or destination.

Item Description

Radio buttons to select a volume

Select (turn on) the radio button for the volume to be used for the copy source or destination.

No.

The volume number is displayed.

Name

The volume name is displayed.

Status

The volume status is displayed.

During initialization of the copy destination SDV, "Available (Initializing)" is displayed.

Refer to "Volume Status" for details.

Type

The volume type is displayed.

Copy source:

Standard

WSV

TPV

FTV

Copy destination:

SDV

TPV

FTV

Usage

The usage of the volume is displayed in the copy source volume list.

  • Block

    The volumes that are used for the SAN.

  • Block/Dedupe&Comp

    The volumes that have both the Deduplication and Compression functions enabled.

  • Block/Dedupe

    The volumes that have the Deduplication function enabled.

  • Block/Comp

    The volumes that have the Compression function enabled.

  • File

    The volumes that are used for the NAS.

    This function only displays NAS backup volumes.

Note

  • Volumes whose usage is "System", "Migration", or "Veeam" are not displayed in the copy source volume list.

  • Volumes whose usage is "Migration" or "Veeam" are not displayed in the copy destination volume list.

Capacity

The volume capacity is displayed.

Function Button

Button Description

[Browse...]

Displays the [Select Source Volume] or [Select Destination Volume] to select copy source volume or copy destination volume.

Operating Procedures

  1. Click [Start SnapOPC+] in [Action].

  2. Click the [Browse...] button for the copy source volume.

  3. Select the copy source volume to be used, and click the [OK] button.

    → The display returns to the initial screen.

    Note

    • In a Unified Storage environment, volumes that are used for the SAN and backup volumes that are used for the NAS are displayed in the copy source volume list.

  4. Click the [Browse...] button for the copy destination volume.

  5. Select the copy destination volume to be used, and click the [OK] button.

    → The display returns to the initial screen.

  6. Check the displayed contents, and click the [Start] button.

    → A confirmation screen appears.

  7. Click the [OK] button.

    → The SnapOPC+ session starts.

    Caution
    • An error screen appears in the following conditions:

      • The SnapOPC+ started in the copy source volume exceeds the maximum number of generations per volume

      • The SnapOPC+ started in the copy source volume exceeds the maximum number of copy sessions for the entire storage system

  8. Click the [Done] button to return to the [Advanced Copy] screen.