Delete Controller Firmware Schedule

Overview

This function deletes the application schedule for the controller firmware.

Caution
  • If any of the following conditions occur, the reservation for deleting the schedule is automatically canceled.
    • The application schedule for the controller firmware is reserved

      • Rebooting of the storage system

      • Power failure or power recovery

      • Machine down recovery

      • The system time in the storage system is changed to a time that is later than the reserved time

    • Start time to apply the controller firmware

      • Other users perform system settings

      • Pinned data exists in the storage system

    • The start time to apply controller firmware (when the application mode is "Update")

      • The storage system is not in normal status

      • The battery status is not "Full Charge"

      • REC sessions with the following conditions appear

        • A blocked copy path is being used and the session status is not "Suspend" or "Error Suspend"

        • The mirror status of the REC buffer that is being used is "Recovering" and the session status is not "Suspend" or "Error Suspend"

      • A storage migration path exists

      • RAID Group Expansion (LDE) is being used

      • A volume is being encrypted

Note

  • When the application schedule for the controller firmware is specified, the start time is displayed in the information field. Refer to the [Firmware Maintenance] function for details.

  • When controller firmware is applied in simple mode, the application schedule can be set. Refer to the [Apply Controller Firmware] function for details.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin  
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Operating Procedures

  1. Click [Delete Firmware Schedule] in [Action].

    → A confirmation screen appears.

  2. Click the [OK] button.

    Deletion of the application schedule for the controller firmware starts.

  3. Click the [Done] button to return to the [Firmware Maintenance] screen.