Modify Storage System Name

Overview

This function registers the name, administrator, and the installation site of the storage system.

Information registered in this screen is used for the following functions and screens:

  • Network management using SNMP

  • Storage system name displayed in the login screen and the operation screens

Caution
  • Once the storage system name has been specified, it cannot be deleted (it can be changed).

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin  
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Settings

Set the Name of this Storage System

In this screen, specify the storage system name, the installation site, and the administrator of the storage system.

Item Description Setting values

Name

Specify the storage system name (required).

Up to 16 alphanumeric characters,

symbols (except ", (comma)" and "?"),

and spaces

Installation Location

Specify the installation site of the storage system.

0 - 50 alphanumeric characters,

symbols (except ", (comma)" and "?"),

and spaces

Administrator

Specify the administrator information (the administrator name, contact information, etc) of the storage system.

0 - 50 alphanumeric characters,

symbols (except ", (comma)" and "?"),

and spaces

Description

Specify the description of the storage system.

0 - 50 alphanumeric characters,

symbols (except ", (comma)" and "?"),

and spaces

Operating Procedures

  1. Click [Modify Storage Name] in [Action].

  2. Specify parameters, and click the [Set] button.

    → A confirmation screen appears.

    Caution
    • An error screen appears in the following conditions:
      • The "Name" is not entered

      • A parameter that does not satisfy the input conditions exists

  3. Click the [OK] button.

    → Setting of the storage system name starts.

  4. Click the [Done] button to return to the [System Settings] screen.