Send SNMP Trap Test

Overview

This function transmits the test trap from the SNMP Agent to the SNMP Manager.

The SNMP Trap is the event information reported by the storage system (SNMP Agent).

Perform SNMP Agent and SNMP Manager settings before executing this test.

Caution
  • Perform the following settings before executing this test. If the SNMP function is disabled, the trap test cannot be performed.
    • Setup Network Environment

    • Setup SNMP Agent Basic Interface

    • Setup SNMP Manager

    • Setup SNMP Agent MIB Access View

    • Setup SNMP Agent User

    • Setup SNMP Agent Community

    • Setup SNMP Agent Trap

  • This function transmits a test trap.

  • When SNMP Manager exists in a different subnetwork from the storage system, specify the IP address or the network address of SNMP Manager in "Allowable IP Address" of the [Setup Network Environment] function.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin  
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Operating Procedures

  1. Click [Send SNMP Trap] in [Action].

  2. Click the [Send] button.

    → A confirmation screen appears.

  3. Click the [OK] button.

    → The SNMP Trap test is performed.

  4. Click the [Done] button to return to the [Network] screen.

    Caution
    • Confirm that the trap has been successfully received by SNMP Manager after the SNMP Trap test has been performed.