Setup Debug Mode

Overview

This function sets the trace level to store the storage system information and the collection mode for panic dumps when errors occur.

Caution

  • If you need to change the debug mode settings, follow the Support Department instructions.

Note

  • Trace information is included in the panic dump.

  • To collect a panic dump, use the [Export/Delete Panic Dump] function.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin  
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to "User Roles and Policies" for details on the policies and roles.

Settings

In this screen, specify the conditions for collecting the storage system information.

Master Trace Level Settings

Item Description Setting values

Master Trace Level

Set the master trace level.

  • Off

    Does not save a trace. Equivalent to level "0xFF".

  • Standard

    The firmware trace information is saved. Equivalent to level "0x06".

  • Detail

    All the firmware trace are saved. Equivalent to level "0x00".

  • Specification

    The firmware traces according to the user specified level are saved.

Off

Standard (Default)

Detail

Specification

Level

When selecting "Specification" for the master trace level, input the trace level.

2-digit hexadecimal

0x00 - 0xFF

0x06 (Default)

Level by Group

Item Description Setting values

Group ID

The group ID (0x00 to 0xFF) is displayed.

Level

Input the trace level for each group ID.

2-digit hexadecimal

0x00 - 0xFF

0x06 (Default)

Panic

Item Description Setting values

Collection Mode

Select the collection mode for panic dump.

  • Nose and Tail Mode

    The latest and oldest panic dumps are saved.

  • Fortnight Mode

    The first and second panic dumps are saved.

  • Off

    Does not save panic dumps.

Nose and Tail Mode (Default)

Fortnight Mode

Off

Operating Procedures

  1. Click [Setup Debug Mode] in [Action].

  2. Specify the parameters, and click the [Set] button.

    → A confirmation screen appears.

  3. Click the [OK] button.

    → The debug mode is set.

  4. Click the [Done] button to return to the [System Settings] screen.