Update Communication Environment Information
Overview
This function updates the communication environment information that is registered for the REMCS center.
When the [Setup Remote Support] function has not been complete in advance, this function cannot be used.
Use the IPv4 addresses for the IP addresses of the proxy server, the SMTP server, the POP server, and the HTTP server. IPv6 addresses cannot be used.
The Remote Support setting information file (communication environment information file) created by using REMCS Environment Setup Assist Tool (REMCS ESAT) can be imported to the storage system, to simplify the input operation required to be set for each storage system.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
There are setting items for communication environment information as follows: "Information File", "Communication Environment Information", "Detailed Configuration Information", "Result Notification Information", and "Time Information".
Information File
Click the [Import] button to import the communication environment information file to the storage system.
Item | Description | Setting values |
---|---|---|
Communication Environment Information File |
Import the "communication environment information file", which was created using the REMCS ESAT, to the storage system. Click the [Browse...] button to specify the "Communication Environment Information File". |
Communication environment information file |
Communication Environment Information
In this field, specify the communication environment information.
Connection
Item | Description | Setting values |
---|---|---|
Connection Type |
Select the connection type when using the REMCS operation. |
Internet Connection Internet Connection (E-Mail only) P-P Connection P-P Connection (E-Mail only) P-P Connection (VPN Connection) P-P Connection (VPN Connection E-Mail only) |
LAN Port used for Remote Support |
Select the LAN port of the storage system that is used for REMCS operation from "MNT" or "RMT". |
MNT RMT |
Service
Item | Description | Setting values |
---|---|---|
Scheduled Connection Time * |
Input the time for scheduled REMCS connection (required). |
Numeric characters Hour: 00 - 23 Minute: 00 - 59 |
Scheduled Connection Period * |
Select the term for scheduled REMCS connection (required). |
Every Day Every Day (except Sunday) Every Day (except Saturday and Sunday) Once per Week |
Specify the Day of the Week |
When "Once per Week" is selected for "Scheduled Connection Period", select the day of the week to execute scheduled REMCS connection. |
Sunday Monday Tuesday Wednesday Thursday Friday Saturday |
Proxy Server
Item | Description | Setting values |
---|---|---|
Proxy Server |
Input the IP address or the domain name of the proxy server that is used for REMCS operation. |
Up to 63 alphanumeric characters and symbols (except space) |
Port No. |
Input the port number of the proxy server. |
Numeric characters 0 - 65535 |
User Name |
Input the user name when using the proxy server. |
Up to 32 alphanumeric characters and symbols (except space) |
Password |
Input the password of the user name when using the proxy server. The password entered is displayed with a series of symbols to hide the specified values. |
Up to 64 alphanumeric characters and symbols (except space) |
SMTP Server
Item | Description | Setting values |
---|---|---|
SMTP Server * |
Input the IP address or the domain name of the SMTP server that is used for REMCS operation (required). |
Up to 239 alphanumeric characters and symbols (except space) |
Port No. * |
Input the port number of the SMTP server (required). |
Numeric characters 0 - 65535 |
Sender E-Mail Address * |
Input the sender E-Mail address of mails sent by the storage system for REMCS operations (required). |
Up to 63 alphanumeric characters and symbols (except space) |
SMTP over SSL |
Select "None", "STARTTLS", or "SSL/TLS" for the SMTP over SSL method. |
None STARTTLS SSL/TLS |
SMTP Authentication Information
Item | Description | Setting values |
---|---|---|
Authentication Type |
Select the SMTP authentication type. |
No SMTP Authentication POP Before SMTP Authentication AUTH SMTP Authentication |
Authentication Method |
When "AUTH SMTP Authentication" is selected for "Authentication Type", specify the SMTP authentication method. |
Automatic CRAM-MD5 PLAIN LOGIN |
POP Server |
When the "Authentication Type" is "POP Before SMTP Authentication", input the domain name or the IP address of the POP server that is used for SMTP Authentication. |
Up to 63 alphanumeric characters and symbols (except space) |
Port No. |
Input the port number that is used when communicating with the POP server. |
Numeric characters 0 - 65535 |
User Name |
Input the user name that is used when communicating with the POP server. This setting is enabled when selecting "POP Before SMTP Authentication" or "AUTH SMTP Authentication" for the "SMTP Authentication Type". |
Up to 64 alphanumeric characters and symbols (except space) |
Password |
Input the password that is used when communicating with the POP server. The password entered is displayed with a series of symbols to hide the specified values. This setting is enabled when selecting "POP Before SMTP Authentication" or "AUTH SMTP Authentication" for the "SMTP Authentication Type". |
Up to 64 alphanumeric characters and symbols (except space) |
REMCS Center
Item | Description | Setting values |
---|---|---|
REMCS Center * |
Select the REMCS center (in each country) where the storage system is connected (required). "Direct Input Setting" is only available when logged in using a user account with the "Maintenance Operation" role. If logged in as the system administrator when "Direct Input Setting" has already been specified, "Direct Input Setting" is displayed for the REMCS Center and cannot be changed to a different center. |
Blank (Default) Fujitsu America Australia Brazil Hong-Kong China Indonesia Korea Malaysia Philippine Singapore Taiwan Thailand Vietnam Individual support in Hawaii OSC Direct Input Setting |
HTTP Server |
If "Direct Input Setting" is selected for the REMCS Center, enter the IP address or the domain name of the remote HTTP server. |
Up to 63 alphanumeric characters and symbols (except space) |
Port No. |
If "Direct Input Setting" is selected for the REMCS Center, enter the port number of the HTTP server. |
Numeric characters 0 - 65535 |
Receiver E-Mail Address |
If "Direct Input Setting" is selected for the REMCS Center, enter the E-mail address of the report destination for the REMCS operation. |
Up to 63 alphanumeric characters and symbols (except space) |
Detailed Configuration Information
In this field, specify the detailed configuration information when sending E-mail.
Item | Description | Setting values |
---|---|---|
Data Transmission Method |
Select whether to "Split" or "Do not Split" into the specified size. Select "Split large E-Mail into multiple E-Mails" or "Split large data into multiple E-Mails", and specify the segment size, when segmenting outgoing mail. If the mail server does not allow the sending of segmented mail using "Split large E-Mail into multiple E-Mails", select "Split large data into multiple E-Mails" or "Do not Split".
|
Split Do not Split • Split large E-Mail into multiple E-Mails 64 - 6400 KB • Split large data into multiple E-Mails 64 - 512 KB |
Specify Storage System Name for HELO/EHLO Announcement when Sending E-Mail |
Select "Specify" or "Do not specify" for the storage system name for HELO/EHLO announcement when sending mail. When "Specify" is selected, input the domain. The domain of the HELO/EHLO Announcement must be specified in the mail protocol. If "Do not specify" has been selected, E-mails are sent using the strings after the "@" of the sender E-mail addresses as domains. If the mail server does not allow using the section after the "@" of the sender E-mail address as the domain, select "Specify" and input the appropriate domain. |
Specify Do not specify When specifying the storage system name Up to 63 alphanumeric characters and symbols (except space) |
Use S/MIME |
Select whether or not to use S/MIME. S/MIME is a standard relating to encryption of E-mails and electronic signatures. Using S/MIME prevents E-mails from being sniffed, spoofed, and falsified. This item is available when one of the following conditions applies:
|
Use Not use |
Result Notification Information
In this field, specify the notification destination of the Remote Support setting result.
Detailed Settings
Item | Description | Setting values |
---|---|---|
Administrator |
Select "Notification" or "Not Notification" for your administrator of the setting confirmation result at the REMCS center. Select "Notification" for the "Administrator" or the "Connection check operator" and confirm the result. |
Notification Not Notification |
Connection check operator |
Select "Notification (Standard E-Mail format)", "Notification (Simple E-Mail format for cell phone)" or "Not Notification" for the connection check operator of the setting confirmation result at the REMCS center. If notifying, input the "Connection check operator E-Mail Address". Specify the "Connection check operator" if there is another person who needs to be notified of the setting confirmation result, other than the administrator. |
Notification (Standard E-Mail format) Notification (Simple E-Mail format for cell phone) Not Notification |
Connection check operator E-Mail Address |
If notifying the connection check operator of the setting confirmation result at the REMCS center, input the E-mail address. |
Up to 60 alphanumeric characters and symbols (except space) |
Time Information
The time information settings do not normally require modification.
If changing the default value, select the "Change following Timing Parameter items" checkbox.
Detailed Settings
Item | Description | Setting values |
---|---|---|
Checkbox |
If changing the time information, select the "Change following Timing Parameter items" checkbox. |
Selected Cleared (Default) |
SMTP Connection Timeout |
Input the timeout limit when using SMTP connection. |
Numeric characters 1 - 600 sec. |
SMTP Response Timeout |
Input the timeout limit for SMTP response. |
Numeric characters 1 - 3600 sec. |
SMTP Retry Count |
Input the retry number of SMTP. |
Numeric characters 1 - 60 |
SMTP Retry Interval |
Input the intervals for retrying SMTP. |
Numeric characters 1 - 3600 sec. |
HTTP Timeout |
Input the timeout limit when using HTTP connection. |
Numeric characters 1 - 3600 sec. |
HTTP Retry Count |
Input the retry number of HTTP. |
Numeric characters 1 - 60 |
HTTP Retry Interval |
Input the intervals for retrying HTTP. |
Numeric characters 1 - 3600 sec. |
Queue Time before Sending E-Mails (only when POP Before SMTP authentication is enabled) |
Input the waiting time for sending mail. |
Numeric characters 1 - 3600 msec. |
Operating Procedures
Click [Update Connection Info] in [Action].
Specify parameters, and click the [Set] button.
→ A confirmation screen appears.
Caution- An error screen appears in the following conditions:
The required items (items with "*") are not specified
Wrong values are entered
When "MNT" is specified for the "LAN Port used for Remote Support" and when the IP Address of the Proxy server/SMTP server/POP server/HTTP server is the same as the broadcast address of the MNT port
When "RMT" is specified for the "LAN Port used for Remote Support" and when the IP Address of the Proxy server/SMTP server/POP server/HTTP server is the same as the broadcast address of the RMT port
The IP address of the Proxy server, SMTP server, POP server, and HTTP server is the same as the local host address
NoteWhen importing Remote Support settings from the communication environment information file to the storage system all at once, click the [Browse...] button to specify the location where the settings file has been stored, and click the [Import] button. If the contents of the specified communication environment information file were set incorrectly, an error screen appears.
- An error screen appears in the following conditions:
Click the [OK] button.
→ Changing of the communication environment information starts.
Click the [Done] button to return to the screen when starting this function in Step 1.
CautionAfter completing the setting, the REMCS center sends the setting confirmation result to the "Administrator E-Mail Address" or the "Connection check operator E-Mail Address". Make sure to confirm the setting results.