SANtricity 11.8 Solutions
Delete volume
You can delete one or more volumes to increase the free capacity of a pool or volume group.
On the volumes that you plan to delete, make sure that:
-
All data is backed up.
-
All Input/Output (I/O) is stopped.
-
Any devices and file systems are unmounted.
Typically, you delete volumes if the volumes were created with the wrong parameters or capacity, or it no longer meets storage configuration needs. Deleting a volume increases the free capacity in the pool or volume group.
| Deleting a volume causes loss of all data on those volumes. |
Be aware that you cannot delete a volume that has one of these conditions:
-
The volume is initializing.
-
The volume is reconstructing.
-
The volume is part of a volume group that contains a drive that is undergoing a copyback operation.
-
The volume is undergoing a modification operation, such as a change of segment size, unless the volume is now in Failed status.
-
The volume is holding any type of persistent reservation.
-
The volume is a source volume or a target volume in a Copy Volume that has a status of Pending, In Progress, or Failed.
| When a volume exceeds a given size (currently 128 TB), the delete operation is performed in the background and the freed space might not be immediately available. |
-
From the Manage page, select the storage system that contains the volumes you want to delete.
-
Select Provisioning > Manage Volumes.
-
Click Delete.
The Delete Volumes dialog box appears.
-
Select one or more volumes that you want to delete, and then confirm that you want to perform the operation.
-
Click Delete.
