Add SAS Host

Overview

This function registers a new SAS host (HBA).

The total number of all the interface type hosts that can be registered in the storage system is 1024 (128 for the ETERNUS DX60 S5).

Caution
  • This function is supported in the ETERNUS DX60 S5/DX100 S5/DX200 S5.

  • This action item is only displayed when the "Use "Add Host"" checkbox is selected for the "Function to Add Host" field in "Web GUI Settings". This checkbox is not selected (this function is not displayed) by default. Refer to the [Setup Subsystem Parameters] function for details.

  • Note that this function does not create a host group. The storage system also has a function that creates new host groups to register hosts as their members. Refer to the [Add SAS Host Group] function for details.

  • Hosts that are registered with this function can belong to host groups. However, only one LUN group can be allocated to a combination of host and port when configuring host affinity.

  • Refer to "Configuration Guide -Server Connection-" for each OS type to assign an appropriate host response to the host that is to be registered. A host response has a recommended pattern which has been prepared for each OS type. Refer to "Recommended Patterns of Host Responses" for details. If an appropriate host response is not configured to the host, the path may not be switched correctly or the volume may not be recognized correctly.

Note
  • To change the SAS host information, use the [Modify SAS Host] function.

  • The host affinity setting can be specified for each SAS host. Refer to the [Create Host Affinity] function for details.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin
AccountAdmin  
SecurityAdmin  
Maintainer

Refer to User Roles and Policies for details on the policies and roles.

Settings

Host Setting

In this screen, register the SAS hosts.

There are two methods to register a host. One method is Selecting a Host from the Displayed Host List by Clicking the [Now Connected] Tab.

The other method is Inputting the Host Information Manually by Clicking the [Manual Input] Tab.

Item Description

Number of Hosts

The number of hosts that are to be registered is displayed.

The number of hosts is determined by the total number of hosts that were selected from the host list on the [Now Connected] screen and the number of hosts that were specified on the [Manual Input] screen.

For the ETERNUS DX60 S5:

0 - 128

For the other models:

0 - 1024

Selecting a Host from the Displayed Host List by Clicking the [Now Connected] Tab

All of the unregistered hosts that are connected to SAS and that can be recognized by the storage system are displayed. Select the hosts that are to be registered in the storage system and specify the SAS host information.

Item Description Setting values

Checkbox to select a host

Select the checkbox of the SAS host that is to be registered in the storage system. The host name and host response can only be specified for the selected SAS host.

Name

Input the name of the SAS host.

An existing host name cannot be specified.

Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces

SAS Address

The SAS address of the SAS host is displayed.

 

Host Response

Select a host response to be assigned to a SAS host.

A list of host responses that are created in the storage system is displayed.

Default

Solaris MPxIO

HP-UX

AIX

AIX VxVM

VS850/SVC

BS2000

Host responses registered in the storage system

Ports

The location information of the CA port, which is connected to the SAS host, is displayed.

CM#x CA#y Port#z

x: CM number

y: CA number

z: Port number

Filter Setting

Function Description

Filter setting is a function used to display a list of only the SAS hosts meeting all the specified conditions.

No filtering is set by default. The following table shows conditions that can be specified.

Item Description Setting values

SAS Address

Input the SAS address for the SAS host that is to be displayed.

SAS hosts matching or partially matching the entered SAS address are displayed.

When not using the SAS address for filtering, leave this item blank.

SAS address

Blank

Inputting the Host Information Manually by Clicking the [Manual Input] Tab

Click the [Add] button at the bottom of the SAS host list to display the [Add SAS Host] screen. Directly input the SAS host information that is to be added in the storage system.

[Add SAS Host] Screen

Item Description Setting values

Name

Specify the SAS host name.

An existing host name cannot be specified.

Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces

SAS Address

Specify the SAS address of the SAS host.

The registered SAS address cannot be used.

Hexadecimal numbers (0 - 9, A - F, a - f)

16 digits (using "F (f)" or "0" in entire 16 digits is not allowed)

Host Response

Select a host response to be assigned to a SAS host.

A list of host responses that are created in the storage system is displayed.

Default

Solaris MPxIO

HP-UX

AIX

AIX VxVM

VS850/SVC

BS2000

Host responses registered in the storage system

Function Button

Button Description

[Rediscover]

Updates the SAS host list which can be recognized by the storage system.

The [Rediscover] button is displayed in the [Now Connected] screen. Clicking the [Rediscover] button updates the SAS host list. The [Rediscover] button clears the checkboxes for the selected SAS hosts. Note that any SAS host information that is specified in the [Manual Input] screen is retained.

[Add]

Adds SAS host information by manual entry.

The [Add] button is displayed in the [Manual Input] screen. If the maximum number of hosts has already been registered, the [Add] button cannot be clicked.

[Delete]

Deletes the selected SAS host information.

The [Delete] button is displayed in the [Manual Input] screen. If no SAS host has been added, the [Delete] button is not displayed.

Operating Procedures

In this screen, register the SAS hosts in the storage system.

  1. Click [Add SAS Host] in [Action].

  2. Add a host in the storage system in the following procedures.
    • Selecting the registration target host from the list
      1. Click the [Now Connected] tab.

      2. Select the host that is to be registered from the SAS host list, input the SAS host information, and click the [Add] button.

        → A confirmation screen appears.

        Caution
        • An error screen appears in the following conditions:
          • The "Name" is not entered

          • The "Name" does not satisfy the input conditions

          • The "Name" is already used for the registration target host or the same "Name" is already used in the storage system

          • The number of hosts that are to be registered is "0"

          • The number of registered hosts has exceeded the maximum number for the storage system

    • Manually specifying the registration target host
      1. Click the [Manual Input] tab.

      2. Click the [Add] button.

        → The [Add SAS Host] screen appears.

      3. Specify the host information of the SAS host that is to be registered, and click the [OK] button.

        → Returns to the [Manual Input] screen.

        Caution
        • An error screen appears in the following conditions:
          • The "Name" is not entered

          • The "Name" does not satisfy the input conditions

          • The "Name" is already used for the registration target host

          • The "SAS Address" is not entered

          • The "SAS Address" does not satisfy the input conditions

          • The "SAS Address" is already used for the registration target host

      4. Repeat Step b and c when registering multiple SAS hosts.

      5. After registering the SAS host is complete, click the [Add] button.

        → A confirmation screen appears.

        Caution
        • An error screen appears in the following conditions:
          • The same "Name" has already been registered in the storage system

          • The same "SAS Address" has already been registered in the storage system

          • The number of hosts that are to be registered is "0"

          • The number of registered hosts has exceeded the maximum number for the storage system

  3. Click the [OK] button.

    → Registration of the SAS host starts.

  4. Click the [Done] button to return to the screen when starting this function in Step 1.
    Note
    • Click the [Continue] button to continue registering SAS hosts.