Change NAS Server Name
Overview
This function changes the server name (host name) specified in the storage system that is used for the NAS system.
This function is used in a Unified Storage environment.
When performing an Active Directory authentication, the ETERNUS DX S5 series' NAS engine uses the NAS server name as the NetBIOS name. If the NAS server name is changed, the Active Directory authentication server must be reconfigured.
- If the Active Directory authentication server has already been registered before changing the NAS server name, perform the following operations.
Delete the setup information for the Active Directory authentication server before starting this function.
Execute this function to change the NAS server name and then register the Active Directory authentication server again.
As a factory default NAS server name, "DXyyyyyyyyyy" ("DX" is fixed and "yyyyyyyyyy" indicates the serial number of the storage system) is specified for this storage system.
To revert back to the default NAS server name, clear the "Name" field and click the [Change] button.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
NAS Server Settings
Item | Description | Setting values |
---|---|---|
Name |
Input the NAS server name for the ETERNUS DX S5 series. |
Alphanumeric characters and symbols (in the US-ASCII format) The following list shows the available characters:
Up to 15 characters "DXyyyyyyyyyy" ("DX" is fixed and "yyyyyyyyyy" indicates the serial number of the storage system) |
Operating Procedures
Click [Change NAS Server Name] in [Action].
Enter the name and click the [Change] button.
→ A confirmation screen appears.
CautionIf the entered name does not satisfy the input conditions, an error screen appears.
Click the [OK] button.
→ Changing of the NAS server name starts.
Click the [Done] button to return to the [Environment Settings] screen.