Modify SAS Host
Overview
This function changes the SAS host information.
When no SAS hosts are registered, the [Modify SAS Host] function cannot be used.
When changing the SAS address or the host response of a SAS host that is currently being used, make sure to stop access to that SAS host. The server must be rebooted after the host response is changed.
This function can change the following SAS host information; "Name" and "SAS address". When the SAS host is not registered in a host group, the "Host Response" setting can also be changed.
When the SAS host is registered in a host group, use the [Modify Host Group] function to change the host response. Refer to the [Modify Host Group (SAS)] function for details.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
SAS Host Setting
In this screen, change the SAS host information.
Item | Description | Setting values |
---|---|---|
Name |
Specify a new SAS host name. An existing host name cannot be used. (Host names cannot overlap with any other host names, irrespective of the interface types.) |
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces |
SAS Address |
Specify a new SAS address. The registered SAS address cannot be used. |
Hexadecimal numbers (0 - 9, A - F, a - f) 16 digits (using "F (f)" or "0" in entire 16 digits is not allowed) |
Host Response |
Select a new host response that is to be assigned to the SAS host. A list of host responses that are created in the storage system is displayed. This item is available only when a SAS host is not registered in the host group. Caution
|
Default Solaris MPxIO HP-UX AIX AIX VxVM VS850/SVC BS2000 Host responses registered in the storage system |
Operating Procedures
In this screen, change the SAS host information.
Select the SAS host to change the host information for, and click [Modify SAS Host] in [Action].
Input new host information and click the [Modify] button.
→ A confirmation screen appears.
Caution- An error screen appears in the following conditions:
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" already exists
The "SAS Address" is not entered
The "SAS Address" does not satisfy the input conditions
The same "SAS Address" is already registered in the storage system
There are some LUNs that cannot be referenced from the SAS host because the "Host Response" setting has been changed (only for SAS hosts that are not registered in a host group)
- An error screen appears in the following conditions:
Click the [OK] button.
→ Changing of the SAS host information starts.
Click the [Done] button to return to the [SAS Host] screen.