Modify Key Server

Overview

This function changes the key server settings.

Note
  • Key server settings that are allocated to a key group can be changed.

  • This function can be used to change "Domain Name / IP Address", "Port No.", and "LAN Port".

  • This function can be used even when operations are being performed for the volumes that configures a key management target RAID group.

User Privileges

Availability of Executions in the Default Role

Default role Availability of executions
Monitor  
Admin
StorageAdmin  
AccountAdmin  
SecurityAdmin
Maintainer  

Refer to "User Roles and Policies" for details on the policies and roles.

Settings

Key Server Setting

Item Description Setting values

Server ID

The selected key server ID (1 or 2) is displayed.

Domain Name / IP Address

The domain name or the IP address of the target key server is displayed.

Input the domain name (FQDN) or the IP address of the key server.

There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6 addresses can be used; "link local address", "global address", "unique local address", or "6to4 address". Refer to "Available IPv6 Address" for details. When the current setting is displayed, the IPv6 address is displayed as an abbreviation.

For domain name specification

Up to 63 alphanumeric characters and symbols

For IPv4 address

xxx.xxx.xxx.xxx

xxx: 1 - 255 for the top field (decimal)

xxx: 0 - 255 for other fields (decimal)

For IPv6 address

xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx

xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)

Refer to "IPv6 Address Notation" for details.

Port No.

The current port number setting is displayed.

Input the port number used to communicate with the key server.

Numeric characters

1 - 65535

5696 (Default)

LAN Port

The current LAN port setting is displayed.

Select "MNT" or "RMT" for the LAN port that is to be used to communicate with the key server.

MNT

RMT

Operating Procedures

  1. Select the key server that is to be changed and click [Modify Key Server] in [Action].

  2. Specify the parameters, and click the [Modify] button.

    → A confirmation screen appears.

    Caution
    • An error screen appears in the following conditions:
      • Each parameter fails to satisfy the input conditions

      • Inputting a domain name or an IP address that is already used for another key server

      • The IP address that was input and the IP address of the LAN port (MNT or RMT) are the same

      • The IP address that was input and the network address of the LAN port (MNT or RMT) are the same

  3. Click the [OK] button.

    → Changing of the key server settings starts.

  4. Click the [Done] button to return to the [Key Management] screen.