Setup E-Mail Notification
Overview
This function is used to configure the E-mail Notification settings for the various events detected by the storage system.
Use the [Setup Event Notification] function to specify which events are to be notified.
- To stop the event notification via E-Mail, perform one of the following procedures.
Select "No" for "Notification E-Mail".
Clear the "E-Mail" checkbox of the notification method using the [Setup Event Notification] function.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
[Notification E-Mail] Tab
In this screen, specify the E-mail notification parameters.
Notification E-Mail Settings
Item | Description | Setting values |
---|---|---|
Notification E-Mail |
Select whether to enable ("Yes") or disable ("No") the E-Mail notifications. |
Yes No (Default) |
Destination E-Mail Address |
Specify the E-Mail destination address. At least one address must be specified. Up to five addresses can be specified. |
Up to 63 alphanumeric characters and symbols (except space) |
Comment |
Input the message (comment) to be added to the E-Mail. The comment can be omitted. |
Up to 255 characters Within ten lines Alphanumeric characters, symbols, and spaces |
[E-Mail Server Settings] Tab
Specify the mail server that is to be used.
Mail Server Settings
Item | Description | Setting values |
---|---|---|
LAN Port used for SMTP Connection |
Select the LAN port connecting to the SMTP server from "MNT" or "RMT". |
MNT RMT |
SMTP Server |
Specify the IP address or domain name of the SMTP server that is to be used. There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6 addresses can be used; "link local address", "global address", "unique local address", or "6to4 address". Refer to "Available IPv6 Address" for details. When the current setting is displayed, the IPv6 address is displayed as an abbreviation. |
For IPv4 address xxx.xxx.xxx.xxx xxx: 1 - 255 for the top field (decimal) xxx: 0 - 255 for other fields (decimal) For IPv6 address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters) Refer to "IPv6 Address Notation" for details. For specifying the domain name Up to 239 alphanumeric characters and symbols |
SMTP Port No. |
Specify the port number used by the SMTP server. |
1 - 65535 25 (Default) |
Sender E-Mail Address |
Input the E-Mail address of the storage system. |
Up to 63 alphanumeric characters and symbols (except space) |
SMTP over SSL |
Select "None", "STARTTLS", or "SSL/TLS" for the SMTP over SSL method. |
None STARTTLS SSL/TLS |
SMTP requires authentication |
Select the user authorization method to connect to the SMTP server from "None" or "AUTH SMTP". |
None AUTH SMTP |
Authentication Method |
If "AUTH SMTP" is selected for "SMTP Authentication Information", select the authentication method from "Automatic", "CRAM-MD5", "PLAIN", or "LOGIN". |
Automatic CRAM-MD5 PLAIN LOGIN |
User Name |
If "AUTH SMTP" is selected for "SMTP requires authentication", input the sender user name. |
Up to 64 alphanumeric characters and symbols |
Password |
When "AUTH SMTP" is selected for "SMTP requires authentication", input the sender password. |
Up to 64 alphanumeric characters and symbols |
[Advanced Settings] Tab
In this screen, configure the timer settings.
Timer Settings
Item | Description | Setting values |
---|---|---|
"Change following Timing Parameter items" checkbox |
To change the timing parameters, select the checkbox. |
|
Connection Timeout |
Input the timeout limit for SMTP connection. |
Numeric characters 1 - 300 sec. 5 sec. (Default) |
Response Timeout |
Input the timeout limit for SMTP response. |
Numeric characters 1 - 300 sec. 5 sec. (Default) |
Maximum Retries |
Input the maximum retry count. |
0 - 5 count |
Retry Interval |
Input the interval between each retry attempt. |
1 - 300 sec. |
Operating Procedures
Click [Setup E-Mail Notification] in [Action].
Specify the parameters, and click the [Set] button.
→ A confirmation screen appears.
Click the [OK] button.
→ The E-mail notification setting is executed.
Click the [Done] button to return to the [Network] screen.
- Perform the following operations to confirm that an E-Mail can be sent to the specified address.
Select "Yes" for "Notification E-Mail", and click the [Set] button to save the changes.
(Even if "Yes" is already selected for "Notification E-Mail", the settings must be saved when settings such as the destination E-Mail address are changed.)
Restart this function and then click the [Send Test E-Mail] button.