Setup Remote Session Permission
Overview
This function performs permission settings for remote sessions with the AIS Connect function. If a remote session is permitted, remotely controlling the storage system from a remote server (AIS Connect server) becomes available.
Settings can be changed when "AIS Connect" is enabled. Refer to the [Setup AIS Connect Environment] function for details.
- The permission setting of a remote session is released if one of the following conditions applies:
When a remote session is not detected before the timeout period that is specified for the timeout setting
When this function forbids remote sessions
When "AIS Connect" is disabled
The permission settings are retained even if the storage system is rebooted or after recovery from a power failure. Note that the timer that monitors remote session connection is reset to "0"in this case.
If the setting of this function is changed to forbid while a remote session is being performed, operations for this remote session are permitted until the user logs out. However, once this remote session is logged out from, this remote session cannot be logged into while the remote session is forbid.
When "AIS Connect" is disabled, all remote sessions that are currently being performed are immediately disconnected.
User Privileges
Availability of Executions in the Default Role
Default role | Availability of executions |
---|---|
Monitor | |
Admin | |
StorageAdmin | |
AccountAdmin | |
SecurityAdmin | |
Maintainer |
Refer to "User Roles and Policies" for details on the policies and roles.
Settings
Remote Session Permission Setting
Item | Description | Setting values |
---|---|---|
Remote Session |
Select whether to allow or forbid a remote session from the AIS Connect server. |
Permit Forbid (Default) |
Remote Session Timeout |
Select the timeout limit for remote session connection. When not setting the timeout limit, select "Unlimited". When "Permit" is selected for "Remote Session", monitoring of the remote sessions starts. If the time exceeds the specified value without a remote session connection, remote session permission is automatically disabled and the set state changes to "Forbid". If a remote session connection is detected while monitoring is being performed, the timer is suspended during connection. After connection is complete, the timer is reset to "0" and monitoring starts again. Selecting the timeout limit is only available when "Permit" is selected for "Remote Session". |
1 (Default) - 24 hours Unlimited |
Operating Procedures
Click [Setup Remote Session Permission] in [Action].
Specify the parameters, and click the [Set] button.
→ A confirmation screen appears.
Click the [OK] button.
→ The permission settings for remote session are applied.
Click the [Done] button to return to the screen when starting this function in Step 1.