ONTAP 9.13.1 commands

system ha interconnect config show

Display the high-availability interconnect configuration information

Availability: This command is available to cluster administrators at the advanced privilege level.

Description

The system ha interconnect config show command displays the high-availability interconnect device basic configuration information.

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>,…​ parameter, the command displays only the fields that you specify.

| [-instance ] }

Use this parameter to display all the fields from all nodes in cluster.

[-node {<nodename>|local}] - Node

Use this parameter to display all the fields from the specified node in the cluster.

[-transport <text>] - Interconnect Type

Selects the nodes that match this HA interconnect transport type.

[-local-sysid <integer>] - Local System ID

Selects the nodes that match this local system unique identifier.

[-partner-sysid <integer>] - Partner System ID

Selects the nodes that match this partner system unique identifier.

[-initiator {local|partner}] - Connection Initiator

Selects the nodes that match this parameter value. The value is the initiator of the connection request.

[-port-name <text>,…​] - Port

Selects the nodes that match this port name.

[-ipaddress <text>,…​] - IP Address

Selects the nodes that match this IP address.

[-interface {backplane|external}] - Interface

Selects the nodes that match this parameter value. external means the HA interconnect links between partner nodes are connected externally. backplane means the HA interconnect links between partner nodes are connected over the backplane.

Examples

The following example displays the HA interconnect configuration information on FAS8000 series nodes in the cluster:

cluster1::*> system ha interconnect config show
Node: ic-f8040-01
          Interconnect Type: Infiniband (Mellanox ConnectX)
            Local System ID: 536875713
          Partner System ID: 536875678
       Connection Initiator: local
                  Interface: backplane

Port   IP Address         Flags
----  -----------------  -----------
ib0a  192.0.3.236        0x0
ib0b  192.0.3.237        0x0
Node: ic-f8040-02
          Interconnect Type: Infiniband (Mellanox ConnectX)
            Local System ID: 536875678
          Partner System ID: 536875713
       Connection Initiator: partner
                  Interface: backplane

Port   IP Address         Flags
----  -----------------  -----------
ib0a  192.0.3.96         0x0
ib0b  192.0.3.97         0x0

2 entries were displayed.

The following example displays the HA interconnect configuration information on FAS2500 series nodes in the cluster:

cluster1::*> system ha interconnect config show
Node: ic-f2554-03
          Interconnect Type: Infiniband (Mellanox Sinai)
            Local System ID: 1781036608
          Partner System ID: 1780360209
       Connection Initiator: local
                  Interface: backplane

Port   IP Address         Flags
----  -----------------  -----------
ib0a  ib0a               -
Node: ic-f2554-04
          Interconnect Type: Infiniband (Mellanox Sinai)
            Local System ID: 1780360209
          Partner System ID: 1781036608
       Connection Initiator: partner
                  Interface: backplane

Port   IP Address         Flags
----  -----------------  -----------
ib0a  ib0a               -

2 entries were displayed.
Top of Page