ONTAP 9.13.1 commands

system switch ethernet show-all

Displays the list of switches that were added and deleted

Availability: This command is available to cluster administrators at the advanced privilege level.

Description

The system switch ethernet show-all command displays configuration details for discovered monitored Ethernet switches (cluster, management and storage), including switches that are user-deleted. From the list of deleted switches, you can delete a switch permanently from the database to re-enable automatic discovery of that switch.

Parameters

{ [-fields <fieldname>,…​]

Selects the fields that have the specified name.

| [-instance ] }

Selects detailed information for all the switches.

[-device <text>] - Device Name

Selects the switches that match the specified device name.

[-address <IP Address>] - IP Address

Selects the switches that match the specified IP address.

[-snmp-version {SNMPv1|SNMPv2c|SNMPv3}] - SNMP Version

Selects the switches that match the specified SNMP version.

[-community-or-username <text>] - SNMPv2c Community String or SNMPv3 Username

Selects the switches that match the specified community string or SNMPv3 username.

[-discovered {true|false}] - Is Discovered

Selects the switches that match the specified discovery setting.

[-type {cluster-network|management-network|storage-network}] - Switch Network

Selects the switches that match the specified switch type.

[-sw-version <text>] - Software Version

Selects the switches that match the specified software version.

[-is-monitoring-enabled-operational {true|false}] - Switch Monitoring Status

Selects the switches that match the specified operational monitoring status.

[-reason <text>] - Reason For Not Monitoring

Selects the switches that match the specified reason.

[-version-source <text>] - Source Of Switch Version

Selects the switches that match the specified version source (for example, from SNMP, CDP or ISDP).

[-rcf-version <text>] - Reference Config File Version

Selects the switches that match the specified reference configuration file version.

[-serial-number <text>] - Serial Number of the Device

Selects the switches that match the specified serial number.

[-model <text>] - Model to display

Selects the switches that match the specified model number.

Examples

cluster1::> system switch ethernet show-all
  Switch                      Type               Address          Model
  --------------------------- ------------------ ---------------- ---------------
  SwitchA                     cluster            1.2.3.4          Nexus5010

        Is Monitored: yes
              Reason:
    Software Version: Cisco IOS 4.1N1
      Version Source: CDP

The example above displays the configuration of all Ethernet switches (cluster, management and storage).

Top of Page