SANtricity 11 Manuals (CA08872-010)

Speed and duplex mode

Keep the Auto-negotiate setting if you want SANtricity System Manager to determine the transmission parameters between the storage system and the network; or if you know the speed and mode of your network, select the parameters from the drop-down list. Only the valid speed and duplex combinations appear in the list.

Enable IPv4 / Enable IPv6

Select one or both options to enable support for IPv4 and IPv6 networks.

Automatically obtain configuration from DHCP server

Select this option to obtain the configuration automatically.

Manually specify static configuration

Select this option, and then enter the controller’s IP address. (If desired, you can cut and paste addresses into the fields.) For IPv4, include the network subnet mask and gateway. For IPv6, include the routable IP address and router IP address.