SANtricity 11 Manuals (CA08872-010)

The shelves where the controllers reside must be identical.

Shelf IDs must be identical.

Expansion shelves must be populated in the same slots with the same drive types.

The RBOD enclosure type must be identical.

The HICs, including the Data Assurance capabilities of the host, must be identical.

The target arrays must be in Optimal status.

The volume capacity on the target array is larger than the source array’s capacity.

Importing from a duplex to simplex configuration is not supported; however, importing from simplex to duplex is allowed.

Disk pool volumes 64 TB or larger on the source array will prevent the import process on the targets.

Thin volumes are not included in the import process.