SANtricity 11 Manuals (CA08872-010)

to Japanese version

View and act on operations in progress

To view and take action on long-running operations, use the Operations in Progress page.

About this task

For each operation listed on the Operations in Progress page, a percentage of completion and estimated time remaining to complete the operation are shown. In some cases, you can stop an operation or place it at a higher or lower priority. You can also clear a completed Volume Copy operation from the list.

Steps
  1. On the Home page, select Show operations in progress.

    The Operations in Progress page appears.

  2. If desired, use the links in the Actions column to stop or change priority for an operation.

    Read all cautionary text provided in the dialog boxes, particularly when stopping an operation.

    You can stop a volume copy operation or change its priority.

  3. Once a volume copy operation is complete, you can select Clear to remove it from the list.

    At the top of the Home page, an informational message and yellow wrench icon appear when an operation is complete. This message includes a link that allows you to clear the operation from the Operations in Progress page.

Operations that appear on the Operations in Progress page include the following:

Operation Possible status of the operation Actions you can take

Volume copy

Completed

Clear

Volume copy

In progress

  • Change priority

  • Stop

Volume copy

Pending

Clear

Volume copy

Failed

  • Clear

  • Re-copy

Volume copy

Stopped

  • Clear

  • Re-copy

Volume create (thick pool volumes larger than 64TiB only)

In progress

none

Volume delete (thick pool volumes larger than 64TiB only)

In progress

none

Asynchronous mirror group initial synchronization

In progress

Suspend

Asynchronous mirror group initial synchronization

Suspended

Resume

Synchronous mirroring

In progress

Suspend

Synchronous mirroring

Suspended

Resume

Snapshot image rollback

In progress

Cancel

Snapshot image rollback

Pending

Cancel

Snapshot image rollback

Paused

  • Cancel

  • Resume

Drive evacuation

In progress

Cancel (depends on the drive evacuation type)

Add capacity to pool or volume group

In progress

none

Change a RAID level for a volume

In progress

none

Reduce capacity for a pool

In progress

none

Thin volume reclamation

In progress

none

Check the time remaining on an instant availability format (IAF) operation for pool volumes

In progress

none

Check the data redundancy of a volume group

In progress

none

Defragment a volume group

In progress

none

Initialize a volume

In progress

none

Increase capacity for a volume

In progress

none

Change segment size for a volume

In progress

none

Drive copy

In progress

none

Data reconstruction

In progress

none

Copyback

In progress

none

Drive Erase

In progress

none

Remote Storage Volumes

In progress

  • Change priority

  • Stop

Remote Storage Volumes

Stopped

  • Resume

  • Disconnect

Remote Storage Volumes

Failed

  • Resume

  • Disconnect

Remote Storage Volumes

Completed

Disconnect

Top of Page