SANtricity 11 Manuals (CA08872-010)

to Japanese version

Remove asynchronous mirror relationship

You remove a mirrored pair to remove the mirror relationship from the primary volume on the local storage system and the secondary volume on the remote storage system.

About this task

Review the following information about orphaned mirrored pairs:

  • An orphaned mirrored pair exists when a member volume in a consistency mirror group has been removed on one side (either the local storage system side or the remote storage system side) but not on the other side.

  • Orphaned mirrored pairs are detected when inter-array communication is restored and the two sides of the mirror configuration reconcile mirror parameters.

  • You can remove a mirrored pair to correct an orphaned mirrored pair state.

Steps
  1. Select Storage > Asynchronous Mirroring.

  2. Select the Mirrored Pair tab.

    The Mirrored Pairs table appears and displays all the mirrored pairs associated with the storage system.

  3. Select the mirrored pair that you want to remove, and then click Remove.

  4. Confirm that you want to remove the mirrored pair, and then click Remove.

Results

SANtricity System Manager performs the following actions:

  • Removes the mirror relationship from the mirror consistency group on the local storage system and on the remote storage system, and deletes the reserved capacity.

  • Returns the primary volume and the secondary volume to host-accessible, non-mirrored volumes.

  • Updates the Asynchronous Mirroring tile with the removal of the asynchronous mirrored pair.

Top of Page