ONTAP 9.15.1 commands

lun igroup initiator remove-proximal-vserver

Remove a Vserver from the initiator’s proximal list

Availability: This command is available to cluster and Vserver administrators at the advanced privilege level.

Description

This command is used to remove the proximal Vserver configuration from an FCP or iSCSI initiator.

Parameters

-vserver <Vserver Name> - Vserver (privilege: advanced)

Specifies the name of the Vserver the initiator will access.

-initiator <text> - Initiator (privilege: advanced)

Specifies the FCP WWPN or iSCSI IQN of the initiator.

{ -proximal-vservers <text>,…​ - Proximal Vserver Name (privilege: advanced)

Specifies the name of the Vserver to remove as proximal. The specified Vserver must either be the same as the -vserver parameter or a Vserver in a peer relationship with snapmirror as an allowed application.

| -all <true> - Remove All (privilege: advanced) }

If true, remove all existing proximal Vservers from the specified initiator.

Examples

The following example configures iqn.2001-04.com.example:uefi-0232314 in Vserver local-vserver as not proximal to the peer-vserver Vserver:

cluster1::*> lun igroup initiator remove-proximal-vserver -vserver local-vserver -initiator iqn.2001-04.com.example:uefi-0232314 -proximal-vservers peer-vserver
Top of Page